Inhaltsverzeichnis
Info / Function
A GPS system on the copter is required for the GPS function PositionHold (PH).
If there is no control movement for "Nick" and "Roll" on the transmitter, the MikroKopter hovers alone and is exposed to the wind.
The copter can leave its current position more or less quickly.
The PositionHold function makes it possible to hold the MikroKopter at its current position in the air at any distance.
For this, the copter uses its current GPS position. This is retained until a new control command is received via the transmitter.
To be able to use this function:
a free 3-way switch is required on the remote control.
This is assigned a free channel (e.g. channel 6)the GPS function is activated in the KopterTool and assigned to the same channel (see GPS setting)
The 3-way switch then has the following switch positions / functions:
- OFF - No function
Middle - PositionHold (PH) function ON
ON - ComingHome (CH) function ON
If the 3-way switch is then in the middle position (PH) and the sticks for pitch and roll are in the middle position, the copter maintains its current position.
If the control stick for "Nick" or "Roll" is then moved, the function PositionHold is automatically deactivated and the copter flies to the new controlled position.
If you let go of the control sticks for "Nick" and "Roll" again, the function PositionHold is automatically activated again and the new position is retained.
INFO: The 3-way switch can always remain in the middle position (when taking off / flying / landing).
- See also