Info

The sensitivity of the embroidery movements for yaw, pitch and roll can be set here.

Nick/Roll P

• Here you set the stick gain.
  The larger the number, the more the MK reacts to an embroidery movement.
  

  Example:
  

  • larger number = strong model reaction even with little embroidery movement
    smaller number = softer steering. A larger embroidery movement is required

---

Nick/Roll D

• The !Microcopter follows the movements of the stick more spontaneously, the larger this value.
  Example:

  • larger number = hard, immediate model reaction, more "toxicity".
    small number = softer steering. A larger embroidery movement is required

---

Yaw P

• Ratio of yaw rate to embroidery deflection.
  Example:

  • larger number = fast rotation.
    small number = slower rotation.

---

External Control

• An external control can be activated via this in addition to the transmitter.
  Any number greater than 128 can be entered to activate this function.
  Or a POTI is entered which is assigned to a switch on the transmitter. In this way the function on the transmitter can be switched on / off.