#acl AdminGroup:read,write,revert EditorsGroup:read,write,revert All:read ############################################################################## ############################################################################## ## DE-EN_Sprachflaggen {{{#!wiki language_selector/de [[ de/errorcode | {{ http://www.mikrokopter.de/addons/shared_addons/themes/mk3/img/flag_ger.png }}]] }}} ########################################################################### <
> <
> <
> <
> <> <
><
> ########################################################################### ########################################################################### <
> ---- = Info = If you have an error on your !MikroKopter, it will usually be displayed with an "error message" in the telemetry. Based on the "error message" you can quickly narrow down the error. ||<-3 class="MK_TableNoBorder" tablestyle="width: 99%">|| ||{{ http://gallery3.mikrokopter.de/var/thumbs/intern/HoTT/Display2/MK-Telemetrie_error.jpg?m=1536845860 }}<
>Graupner HoTT - MK-Telemetrie||{{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Tool/Display/KopterTool-err7.jpg?m=1543479157 }}<
>!MikroKopter-Tool - Virtuelles Display||{{ http://gallery3.mikrokopter.de/var/thumbs/tech/JetiError.jpg?m=1410811346 }}<
>!JetiBox|| ############################################################################## ############################################################################## <
><
><
><
> ---- = err1: FC not compatible = {{{{#!wiki important /!\ '''Reason:''' * The installed software versions in your !FlightCtrl and !NaviCtrl are different (!) '''Remedy:''' * Install the same versions (numbers) in your !FlightCtrl and !NaviCtrl ([[en/download|Download]]) }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err2: MK3Mag not compatible = {{{{#!wiki important '''INFO''' Applies only to older !NaviCtrl V1.1 (red) with external "MK3Mag" Modul! <
><
> /!\ '''Reason:''' * The software on your MK3Mag is not compatible with the Software-Version on your !NaviCtrl. (!) '''Remedy:''' * Software-Update !Mk3Mag ([[http://svn.mikrokopter.de/websvn/filedetails.php?repname=MK3Mag&path=%2Ftags%2FV0.23a%2FHex-Files%2FMK3Mag_MEGA168_V0_23a_SVN72.hex|Download]]) }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err3: no FC communication = {{{{#!wiki important /!\ '''Reason:''' * The !NaviCtrl has no communication / connection to !FlightCtrl * After a faulty update Software is deleted on the !FlightCtrl (!) '''Remedy:''' * Update the software on your !FlightCtrl ~-(connect the MKUSB directly with the !FlightCtrl)-~ * Check power supply to !FlightCtrl * Check / exchange the 6- __AND__ 10-pol ribbon cable between !FlightCtrl/NaviCtrl * Check the soldered pin headers for contact / damage }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err4: no compass communication = {{{{#!wiki important /!\ '''Reason:''' * No communication between compass and !NaviCtrl/FlightCtrl (!) '''Remedy:''' * Check connection between !NaviCtrl / compass (Molex cabel FC/Navi<->Kompass not connected / damaged) * Eventually interference by other hardware ~-(e.e. Gimbal, Video transmitter etc. - to close to your compass)-~ * MK3Mag: Pin headers too short or oxidized ~-(the green LED on your !MK3Mag must be lit or blinking)-~ }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err5: no GPS communication = {{{{#!wiki important /!\ '''Reason:''' * No communication from GPS to !NaviCtrl/FlightCtrl or * You use the button "MKGPS" in the !KopterTool -> The data is diverted from the copter to the PC (!) '''Remedy:''' * Check/change molex cable between !NaviCtrl/FlightCtrl * The green LED on your MKGPS must be lit or blinking * install the latest software on your !NaviCtrl/FlightCtrl * close the GPS-window in your !KopterTool }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err6: bad compass value = {{{{#!wiki important /!\ '''Reason:''' * The compass value is invalid (!) '''Remedy:''' * Recalibrate the compass __and__ check the values ([[en/CalibrateCompass|Manual]]) * If the message occurs in flight or if the compass has already been calibrated correctly, <
> the compass sensor may have a defect. <
> Then please contact the !MikroKopter-support: '''support@hisystems.de''' }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err7: RC Signal lost = {{{{#!wiki important /!\ '''Reason:''' * No reception / signal from the receiver to the !FlightCtrl <
> Info-Beepton: [[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=116140&g2_GALLERYSID=4a727a8c25ff2b4a7ca60ab985747261|signal loss]] (!) '''Remedy:''' * Switch on transmitter * Check connection cable between receiver / !FlightCtrl * Bind receiver with remote control and check settings (sum signal) * Set correct receiver in the !KopterTool }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err8: FC spi rx error = {{{{#!wiki important '''INFO''' Applies only to older single module !NaviCtrl and !FlightCtrl (not !FlightCtrl V3) <
><
> /!\ '''Reason:''' * No "SPI"-communication between !NaviCtrl and !FlightCtrl (!) '''Remedy:''' * Check / exchange the 6- __AND__ 10-pol ribbon cable between !FlightCtrl/NaviCtrl * Check the soldered pin headers for contact / damage }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err9: no NC communication = '''INFO''' Applies only to older single module !NaviCtrl and !FlightCtrl (not !FlightCtrl V3) <
><
> {{{{#!wiki important /!\ '''Reason:''' * Communication between !FlightCtrl and !NaviCtrl suddenly interrupted <
> Info-Beepton: [[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=116132&g2_GALLERYSID=4a727a8c25ff2b4a7ca60ab985747261|lost communication between FC and NC]] (!) '''Remedy:''' * Check / exchange the 6- __AND__ 10-pol ribbon cable between !FlightCtrl/NaviCtrl * Check the soldered pin headers for contact / damage }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err10: FC Nick Gyro = {{{{#!wiki important /!\ '''Reason:''' * The analog sensor signal of the Nick gyro was out of tolerance during calibration <
> ~-The value must be between 1500 and 8500. This can be checked in the !KopterTool <
> (Button -> !FlightCtrl / in the virtual display under "Gyro-Sensor" - the value in brackets) -~ (!) '''Remedy:''' * Recalibrate gyros - Important: the copter must stand still! * Check solder joints to the gyro * If the error is displayed permanently and repeatedly, there will be a defect on the gyro. <
> Then please contact the !MikroKopter-support: '''support@hisystems.de''' }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err11: FC Roll Gyro = {{{{#!wiki important /!\ '''Reason:''' * The analog sensor signal of the Roll gyro was out of tolerance during calibration <
> ~-The value must be between 1500 and 8500. This can be checked in the !KopterTool <
> (Button -> !FlightCtrl / in the virtual display under "Gyro-Sensor" - the value in brackets) -~ (!) '''Remedy:''' * Recalibrate gyros - Important: the copter must stand still! * Check solder joints to the gyro * If the error is displayed permanently and repeatedly, there will be a defect on the gyro. <
> Then please contact the !MikroKopter-support: '''support@hisystems.de''' }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err12: FC Yaw Gyro = {{{{#!wiki important /!\ '''Reason:''' * The analog sensor signal of the Yaw gyro was out of tolerance during calibration <
> ~-The value must be between 1500 and 8500. This can be checked in the !KopterTool <
> (Button -> !FlightCtrl / in the virtual display under "Gyro-Sensor" - the value in brackets) -~ (!) '''Remedy:''' * Recalibrate gyros - Important: the copter must stand still! * Check solder joints to the gyro * If the error is displayed permanently and repeatedly, there will be a defect on the gyro. <
> Then please contact the !MikroKopter-support: '''support@hisystems.de''' }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err13: FC Nick ACC = {{{{#!wiki important /!\ '''Reason:''' * The analog sensor signal of the ACC acceleration sensor (for Nick) was out of tolerance during calibration <
> ~-The value must be between 300 and 750. This can be checked in the !KopterTool <
> (Button -> !FlightCtrl / in the virtual display under "ACC-Sensor" - the value in brackets) -~ (!) '''Remedy:''' * Recalibrate gyros - Important: the copter must stand still! * Check solder joints to the gyro * If the error is displayed permanently and repeatedly, there will be a defect on the gyro. <
> Then please contact the !MikroKopter-support: '''support@hisystems.de''' }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err14: FC Roll ACC = {{{{#!wiki important /!\ '''Reason:''' * The analog sensor signal of the ACC acceleration sensor (for Roll) was out of tolerance during calibration <
> ~-The value must be between 300 and 750. This can be checked in the !KopterTool <
> (Button -> !FlightCtrl / in the virtual display under "ACC-Sensor" - the value in brackets) -~ (!) '''Remedy:''' * Recalibrate gyros - Important: the copter must stand still! * Check solder joints to the gyro * If the error is displayed permanently and repeatedly, there will be a defect on the gyro. <
> Then please contact the !MikroKopter-support: '''support@hisystems.de''' }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err15: FC Z-ACC = {{{{#!wiki important /!\ '''Reason:''' * The analog sensor signal of the ACC acceleration sensor (for Z-axis) was out of tolerance during calibration <
> ~-The value must be between 300 and 750. This can be checked in the !KopterTool <
> (Button -> !FlightCtrl / in the virtual display under "ACC-Sensor" - the value in brackets) -~ (!) '''Remedy:''' * Recalibrate gyros - Important: the copter must stand still! * Check solder joints to the gyro * If the error is displayed permanently and repeatedly, there will be a defect on the gyro. <
> Then please contact the !MikroKopter-support: '''support@hisystems.de''' }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err16: Pressure sensor = {{{{#!wiki important /!\ '''Reason:''' * The analog sensor signal from the air pressure sensor was out of tolerance during calibration (!) '''Remedy:''' * Kopter is located __outside__ of the air pressure measuring range * !FlightCtrl V2.1 -> Measuring range up to 1500m height * !FlightCtrl V2.5 / V3.0 -> Measuring range up to 5000m height * For manual flights above the measuring range => Deactivate the air pressure sensor in the settings * [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=74&products_id=197|Air pressure sensor]] is defective or a connection contact broken (only for !FlightCtrl V1.x/V2.1) }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err17: FC I2C = {{{{#!wiki important /!\ '''Reason:''' * The I2C communication to the BL-Ctrls is disturbed (!) '''Remedy:''' * Check supply of the BL-Ctrls * Check I2C-cables * Molexkabel FC<->BL-Ctrl = Loose connection / disconnection * For self-soldered cables = C to C / D to D check * Check addresses of the BL-Ctrls (Double occupancy / missing address) * Disconnect single BL-Ctrls to find one defective<
> ~-(only possible with single controllers - not possible with V3 BL distributors)-~ * Until !FlightCtrl V2.5 * Check 10pol. ribbon cable from !FlightCtrl to !NaviCtrl * If something else is connected on the 10pol pin stripe, remove it <
> ~-(on this 10pol. pin stripe we also have the I2C-Bus)-~ }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err18: Bl Missing = {{{{#!wiki important /!\ '''Reason:''' * One (or more) BL-Ctrl was not found, but it is used in the mixer table (!) '''Remedy:''' * Check supply of the BL-Ctrls * Check addresses of the BL-Ctrls (Double occupancy / missing address) * Wrong mixer set - check [[en/MK-Parameter/Mixer-SETUP|Mixer table]] }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err19: Mixer Error = {{{{#!wiki important /!\ '''Reason:''' * There are more BL-Ctrls connected than expected (!) '''Remedy:''' * Check addresses of the BL-Ctrls (Double occupancy / missing address) * Wrong mixer set - check [[en/MK-Parameter/Mixer-SETUP|Mixer table]] }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err20: Carefree Error = {{{{#!wiki important /!\ '''Reason:''' * The !CareFree function is activated even though there is no valid compass value <
> Info-Beep: [[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=116118&g2_GALLERYSID=4a727a8c25ff2b4a7ca60ab985747261|Compass failure in flight]] (!) '''Remedy:''' * Compass is not calibrated / recalibrated * Up to !FlightCtrl V2.5 -> no !NaviCtrl and/or no Kompass connected * !FlightCtrl V3.0 -> no Kompass connected }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err21: GPS lost = {{{{#!wiki important /!\ '''Reason:''' * The GPS-Signal was lost during flight * Less than 4 satellites are received <
> ~-(at least 6 satellites are needed)-~ (!) '''Remedy:''' * Avoid shadowing of the GPS <
> ~-(Tall trees, houses etc.)-~ * Check if disturbing solar storms prevail during the flight ([[http://www.n3kl.org/sun/images/noaa_kp_3d.gif?|Link]]) <
> if available -> fly at a later date * If problem persists, replace GPS }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err22: Magnet Error = {{{{#!wiki important /!\ '''Reason:''' * The magnetic field of the compass-sensor is 15% different to the magnetic field during calibration (!) '''Remedy:''' * Eliminate magnetic sources of interference * Search for another starting place ~-(Do not start from buildings or other metallic substrates)-~ * If necessary, shorten the incorrectly laid power cable, buzzer, etc. and twist it * Recalibrate the compass __and__ check the values ([[en/CalibrateCompass|Link]]) }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err23: Motor restart = {{{{#!wiki important /!\ '''Reason:''' * A BL-Ctrl tries to restart the connected motor * Motor is blocked * Cable break on the motor (!) '''Remedy:''' * Regularly check engines for smooth running * Avoid landing in tall grass * Route motor cables without sharp creases }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err24: BL Limitation = {{{{#!wiki important /!\ '''Reason:''' * A BL regulator goes into the power limit * either overcurrent * or overtemperature (!) '''Remedy:''' * Combination of motor / propeller does not fit together optimally * Total weight of the copter is too high * Heat accumulation at the BL-Ctrl -> ensure ventilation }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err25: Waypoint range = {{{{#!wiki important /!\ '''Reason:''' * The approached waypoint is out of reach and will not be reached (!) '''Remedy:''' * Place waypoints within the possible range * Purchase a license with a longer range for WP-flight ([[https://www.mikrocontroller.com/index.php?main_page=index&cPath=119|Link]]) }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err26: No SD-Card = {{{{#!wiki important /!\ '''Reason:''' * There is no SD-Karte in your !FlightCtrl V3 / !NaviCtrl (!) '''Remedy:''' * Option "No flight without SD-Card" <
> If this option is __activated__ and there is no SD-card (max.2GB/FAT16) in your !FlightCtrl V3.0 / !NaviCtrl, <
> or the SD-card is not inserted correctly you will see this error and you can not start the copter<
> Remedy: Insert SD card (max.2GB/FAT16)<
> or * Deactivate the Option "No flight without SD-Card" }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err27: SD Logging aborted = {{{{#!wiki important /!\ '''Reason:''' * The Option "No flight without SD-Card" is set in the settings active and the logging was stopped (!) '''Remedy:''' * maybe Contact problems with the SD card => Remove the card and plug it in again * SD-Karte is not ok => change the SD-card (max. 2GB / FAT16) * Write speed of the SD card is maybe too slow => change the SD-card (max. 2GB / FAT16) }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err28: Flying range! = {{{{#!wiki important /!\ '''Reason:''' * The copter has reached the maximum possible flight radius (!) '''Remedy:''' * __Normal Flight__ * A flight radius is set under ''"Navi-Ctrl2"'' -> ''"Max.Flying Range"'' <
> Change the radius (1m-247m) or deactivate this function (0) to fly so far away as you want * __Waypoint flight__ * The max. possible flight range for a waypoint flight is reached * A flight radius is set under ''"Navi-Ctrl2"'' -> ''"Max.Flying Range"'' and reached * Disable the ''"Max.Flying Range"'' (0) to fly the max. possible range for a waypoint flight (see INFO) <
> '''INFO:''' The range for a waypoint flight is limited ! * __Without license__ -> you can fly to waypoints in a flight range up to 250m around the place where you start * __With license__ -> you can fly to waypoints in a flight range the license allows around the place where you start * Buy a bigger range: [[https://www.mikrocontroller.com/index.php?main_page=index&cPath=119|Link]] }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err29: Max Altitude = {{{{#!wiki important /!\ '''Reason:''' * In the settings under ''"Altitude"'' a limit is set under ''"Max.Altitude"'' and this limit is reached (!) '''Remedy:''' * Change the value under ''"Max.Altitude"'' (1-247m) or deactivate it (0) to fly so high as you want }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err30: No GPS Fix = {{{{#!wiki important /!\ '''Reason:''' * In the settings under ''"Misc"'' the function ''"no start without GPS fix"'' is activated __and__ * there s no GPS fix when you will start the motors => so you can NOT start themotors (!) '''Remedy:''' * Wait until the GPS receive enough satellites (min.6) and the GPS fix is there (It will not work indoor!) * Deactivate the function ''"no start without GPS fix"'' <
> __INFO:__ If you deactivate this function you can start the copter also without GPS fix <
'''BUT:''' The copter __did not__ have a Homeposition and the functions !ComingHome or the emergency functions !FailSafe / !AkkuSafe will NOT work ! }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err31: compass not calibrated = {{{{#!wiki important /!\ '''Reason:''' * The sensor (compass) on your copter is not calibrated (!) '''Remedy:''' * calibrate the compass ([[en/CalibrateCompass|Link]]) }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err32: ERR:BL selftest = {{{{#!wiki important /!\ '''Reason:''' * A BL controller failed the self-test after power up and flashes red (!) '''Remedy:''' * Disconnect the battery from the copter and reconnect it * If the error persists, the controller has a defect <
> Then please contact the !MikroKopter-support: '''support@hisystems.de''' }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err33: no ext. compass = {{{{#!wiki important /!\ '''Reason:''' * The externally connected compass does not respond (!) '''Remedy:''' * Check the molex cable between compass and !FlightCtrl * The molex cable between compass and !FlightCtrl is too long * Error remains with new short molex-cable => Compass has a defect -> exchange }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err34: compass sensor = {{{{#!wiki important /!\ '''Reason:''' * The compass returns invalid data (!) '''Remedy:''' * Compass has a defect -> exchange }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err35: FAILSAFE pos.! = {{{{#!wiki important /!\ '''Reason:''' * "Failsafe" points were set via the !KopterTool (MAP) and stored in the Kopter. <
> During a "signal lost" or if the battery is empty the copter will fly automatically to the next set Failsafe-Position }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err36: Redundancy = {{{{#!wiki important '''INFO''' Message only if you use a redundant electronic! <
><
> /!\ '''Reason:''' * Redundancy is not active (!) '''Remedy:''' * Molex cable between BL-Ctrl board (connection->"UART") and __Slave__-!FlightCtrl (connection->"BL") is not there or has an interruption * Molex cable between Master-!FlightCtrl and Slave-!FlightCtrl (connection->"CAN" is not there or has an interruption * Be sure that the right software for Master __and__ Slave !FlightCtrl is installed<
> and the settings are in both the same }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err37: Redundancy test = {{{{#!wiki important '''INFO''' Message only if you use a redundant electronic! <
><
> /!\ '''Reason:''' * In the settings under ''"User"'' the ''"Parameter6"'' ~-(master test Motor 1 off)-~ / <
> and / or ''"Parameter7"'' ~-(master test I2C Bus failure)-~ is set. <
> => If you set here e.g. a switch for a Parameter you can switch this function ON/OFF (!) '''Remedy:''' * Switch the function OFF * Deactivate the function under ''"Parameter6/7"'' (0) }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err38: GPS Update rate = {{{{#!wiki important /!\ '''Reason:''' * The update rate of the GPS module drops below a critical value (!) '''Remedy:''' * Maybe a loose contact / break in the Molex cable between GPS <-> !FlightCtrl V3 / !NaviCtrl }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err39: Canbus = {{{{#!wiki important /!\ '''Reason:''' * Interruption at the Canbus ~-(connection "CAN" -> !FlightCtrl V3)-~ (!) '''Remedy:''' * Possible loose contact / break in the Molex cable on the Can Bus }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err40: 5V RC-Supply = {{{{#!wiki important /!\ '''Reason:''' * The 5V supply for the receiver or external components is missing (!) '''Remedy:''' * Recom/Traco on your !FlightCtrl is damaged * Short circuit on 5V line }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err41: Power-Supply = {{{{#!wiki important /!\ '''Reason:''' * The supply voltage is below 5V (!) '''Remedy:''' * Recom/Traco on !FlightCtrl defective * Maybe the connected receiver or a servo connected to the ''Tiny servo adapter'' or an external component not OK, defective }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err42: ACC not calibr. (0x00 0x40) = {{{{#!wiki important '''INFO''' The error message can also be displayed as "0x00 0x40"! <
><
> /!\ '''Reason:''' * ACC not calibrated <
> (!) '''Remedy:''' * Calibrate ACC => [[en/CalibrateACC|Link]] }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err43: Parachute! = {{{{#!wiki important /!\ '''Reason:''' * The input '' IO1 '' on the !FlightCtrl V3 has been shorted and the motors are off immediately (!) '''Remedy:''' * This is a security feature that needs to be unlocked by [[https://www.mikrocontroller.com/index.php?main_page=index&cPath=119|license]] <
> In addition, the value ''"IO1_FUNCTION"'' ~-(on the SD card in the ''"SETTINGS.INI"'')-~ must be activated (9). <
> If you then short the input "IO2", the motors will stop immediately. }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err44: Outside Flyzone = {{{{#!wiki important /!\ '''Reason:''' * A ''Flight Zone'' was set via the !KopterTool (MAP) and stored in the Kopter<
> The copter is outside the predetermined flight zone (!) '''Remedy:''' * The copter was started outside the registered flight zone => Start your copter inside the flight zone * By e.g. strong wind, the copter was pressed in flight over the flight zone => If possible, fly back }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err45: No Flyzone = {{{{#!wiki important /!\ '''Reason:''' * In the settings under ''"Misc"'' the function ''"not start without defined !FlyZone"'' is activated * and a ''Flight Zone'' was __not__ set via the !KopterTool (MAP) and stored in the Kopter (!) '''Remedy:''' * Create the needed ''Flight Zone'' via the !KopterTool (MAP) and store it into the Kopter or * deactivate the function ''"not start without defined !FlyZone"'' }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err46: Calibration = {{{{#!wiki important /!\ '''Reason:''' * Every time when you connect ta Lipo to your copter you have to activate/calibrate the copter ~-(throttle up + yaw left)-~ <
> You can also get this message if the copter is moving or wobbling during this calibration. (!) '''Remedy:''' * Place the copter on a firm surface during calibration * Wait until the copter stops moving / wobbling * Recalibrate }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err47: Ext.GPS Fix lost = {{{{#!wiki important /!\ '''Reason:''' * An externally connected GNSS module has lost its fix (!) '''Remedy:''' * Wait until the ext. Module has a GPS fix again }}}} ############################################################################## ############################################################################## <
><
><
><
> ---- = err 1:x => ErrorCodes from FlightControl = {{{{#!wiki important '''INFO''' These error codes are displayed when __no__ !NaviCtrl is connected. Typically, a hardware error is present here. <
> Then please contact the !MikroKopter-support: '''support@hisystems.de''' ############################################################################## <
> ---- '''!HardwareError 1:1''' /!\ '''Reason:''' * Problem with sensor: Gyro Nick (!) '''Remedy:''' * Replace Nick Gyro => Contact !MikroKopter support for a repair: '''support@hisystems.de''' ############################################################################## <
> ---- '''!HardwareError 1:2''' /!\ '''Reason:''' * Problem with sensor: Gyro Roll (!) '''Remedy:''' * Replace Roll Gyro => Contact !MikroKopter support for a repair: '''support@hisystems.de''' ############################################################################## <
> ---- '''!HardwareError 1:4''' /!\ '''Reason:''' * Problem with sensor: Gyro Yaw (!) '''Remedy:''' * Replace yaw Gyro => Contact !MikroKopter support for a repair: '''support@hisystems.de''' ############################################################################## <
> ---- '''!HardwareError 1:8''' /!\ '''Reason:''' * Problem with sensor: ACC Nick (!) '''Remedy:''' * Replace ACC sensor => Contact !MikroKopter support for a repair: '''support@hisystems.de''' ############################################################################## <
> ---- '''!HardwareError 1:16''' /!\ '''Reason:''' * Problem with sensor: ACC Roll (!) '''Remedy:''' * Replace ACC sensor => Contact !MikroKopter support for a repair: '''support@hisystems.de''' ############################################################################## <
> ---- '''!HardwareError 1:32''' /!\ '''Reason:''' * Problem with sensor: ACC Z (!) '''Remedy:''' * Replace ACC sensor => Contact !MikroKopter support for a repair: '''support@hisystems.de''' ############################################################################## <
> ---- '''!HardwareError 1:64''' /!\ '''Reason:''' * Problem with air pressure sensor (!) '''Remedy:''' * Replace air pressure sensor => Contact !MikroKopter support for a repair: '''support@hisystems.de''' ############################################################################## <
> ---- '''!HardwareError 1:128''' /!\ '''Reason:''' * Problem with compass or !CareFree (!) '''Remedy:''' * recalibrate the compass * Replace compass => Contact !MikroKopter support for a repair: '''support@hisystems.de''' }}}} ############################################################################## <
><
><
><
> ---- = Beeptöne = * [[https://doc.mikrokopter.de/de/errorcode?action=AttachFile&do=get&target=Beepcode_RC_Lost.mp3|Lost signal|target="_blank"]] * [[https://doc.mikrokopter.de/de/errorcode?action=AttachFile&do=get&target=Beepcode_Undervoltage.mp3|Undervoltage - Lipo empty|target="_blank"]] * [[https://doc.mikrokopter.de/de/errorcode?action=AttachFile&do=get&target=Beepcode_NC-Communication.mp3|Failure of communication between FC and NC|target="_blank"]] * [[https://doc.mikrokopter.de/de/errorcode?action=AttachFile&do=get&target=Beepcode_Compass_Error.mp3|Compass failure in flight|target="_blank"]] * [[https://doc.mikrokopter.de/de/errorcode?action=AttachFile&do=get&target=Beepcode_OutOfRange.mp3|GPS max radius exceeded|target="_blank"]] * [[https://doc.mikrokopter.de/de/errorcode?action=AttachFile&do=get&target=Beepcode_I2C_Error.mp3|I2C error - communication between FC and BL controllers|target="_blank"]] ----