#acl AdminGroup:read,write,revert EditorsGroup:read,write,revert All:read

##############################################################################
##############################################################################

## DE-EN_Sprachflaggen

{{{#!wiki language_selector/de
[[ de/Waypoint | {{ http://www.mikrokopter.de/addons/shared_addons/themes/mk3/img/flag_ger.png }}]]
}}}

###########################################################################
<<BR>>
<<BR>>
<<BR>>
<<BR>>
<<TableOfContents>>
<<BR>><<BR>>
###########################################################################
###########################################################################
<<BR>>


= MikroKopterTool-OSD =

With the !MikroKopterTool-OSD you can see the telemetry of the copter (if the copter is connected) and also plan a waypoint flight.<<BR>>
Thereby you can plan a waypoint flight with, but also without connected copter. <<BR>>

You can place up to 32 (200 with license) way points, POI or !FailSafe emergency landing sites easy, fast and personalized on a map.<<BR>>
If you have a connection between copter <-> PC you can send your planed waypoint flight directly to your copter. <<BR>>
But you can also save the planed waypoint flight on your computer and open it later. Or you can save it on the <<BR>>
SD card in your copter So you can also load and use the planed waypoint flight without computer whenever you want.

For the hobby use of we have an operating range of 250m (around the starting point) where you can use the waypoints..<<BR>>
Commercial users can use a larger range for the waypoint flight (depending on the purchased license). <<BR>>

<<BR>><<BR>>

{{{{#!wiki important
'''INFO'''

The '''!MikroKopterTool-OSD''' can '''only''' be used if you use a '''[[en/GPS-System|Set Navigation]]''' on your copter.
<<BR>><<BR>>
Before using the Waipoint-Function it is necessary that the user clarifies wether such a mode of operation is permitted in the country / to the respective site or by legal, insurance or other terms..<<BR>><<BR>>

The Waypoint fly can be used only if a GPS-System is available on the Kopter and a Sat-Fix is present!
}}}} 




##############################################################################################################################

= Open the MikroKopterTool-OSD =

In the main window of the '''[[en/MikroKopterTool|KopterTool]]''' you will find the button '''"OSD"'''. <<BR>>
A "click" on the button '''"OSD"''' will open the '''!MikroKopterTool-OSD'''. <<BR>><<BR>>

[[ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/OSD-%C3%96ffnen-01.jpg?m=1427968989 | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/KopterTool_ab_V2_0/OSD/OSD-%C3%96ffnen-01.jpg?m=1427968989 }} ]]
{{attachment:symbols/Pfeil_rechts.png}}
[[ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/OSD-NoMap_NoCopter.jpg?m=1427894353 | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/KopterTool_ab_V2_0/OSD/OSD-NoMap_NoCopter.jpg?m=1427894353 }} ]]






<<BR>><<BR>><<BR>>
##############################################################################################################################

= OSD window structure =

The OSD has four sections:
<<BR>><<BR>>

||<class="MK_TableNoBorder">''Titlebar'' -->||<class="MK_TableNoBorder">{{ http://gallery3.mikrokopter.de/var/resizes/intern/KopterTool_ab_V2_0/OSD/_en/OSD-Explo-Teil1_en.jpg?m=1437663550 }}||
||<class="MK_TableNoBorder">''Menubar'' -->||<class="MK_TableNoBorder">{{ http://gallery3.mikrokopter.de/var/resizes/intern/KopterTool_ab_V2_0/OSD/_en/OSD-Explo-Teil2_en.jpg?m=1437663550 }}||
||<class="MK_TableNoBorder">''Telemetry display'' -->||<class="MK_TableNoBorder">{{ http://gallery3.mikrokopter.de/var/resizes/intern/KopterTool_ab_V2_0/OSD/_en/OSD-Explo-Teil3_en.jpg?m=1437663550 }}||
||<class="MK_TableNoBorder">''Map window'' -->||<class="MK_TableNoBorder">{{ http://gallery3.mikrokopter.de/var/resizes/intern/KopterTool_ab_V2_0/OSD/OSD-Explo-Teil4.jpg?m=1427976656 }}||

##############################################################################################################################

----
== Titlebar ==

In the left corner of the titlebar you can see the size of the map window. <<BR>>
With the mouse you can grab the corners / sides of the OSD window and change the size as you want. <<BR>><<BR>>
{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/_en/Titelleiste-Bildgr%C3%B6%C3%9Fe_en.jpg?m=1437663550 }}

Move the mouse over a loaded map and you will see the position in decimal degrees (latitude / longitude). <<BR>><<BR>>
{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Titelleiste-Position.jpg?m=1429257119 }}


----
== Menubar ==

Different settings can be made via the menu bar. <<BR>>

More info on this can be found below under [[#Sprung1|Menubar]]. <<BR>><<BR>>

{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/_en/Men%C3%BCleiste_en.jpg?m=1437663549 }}
<<BR>><<BR>>



----
== Telemetry display ==

In the telemetry display all telemetry data of a connected Copters are displayed. <<BR>>

More info on this can be found below under [[#Sprung2|Telemetry display]]. <<BR>><<BR>>

{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/_en/OSD-Explo-Teil3_en.jpg?m=1437663550 }}
<<BR>><<BR>>



----
== Map window ==

In the map window you see the loaded map. <<BR>>

More info on this can be found below under [[#Sprung3|Get online map]]. <<BR>><<BR>>

{{ http://gallery3.mikrokopter.de/var/resizes/intern/KopterTool_ab_V2_0/OSD/OSD-Explo-Teil4.jpg?m=1427976656 }} 
<<BR>><<BR>>


##############################################################################
<<BR>><<BR>><<BR>><<BR>><<BR>><<BR>>


= Symbols in the map window =

||<class="MK_TableNoBorder" style="vertical-align: top;">If you place a Waypoint, POI or Failsafe-Point on the map, you will see a Symbol for it.<<BR>>If you have a wireless connection between your copter and your PC you will also see some other symbols like the position of the copter.||<class="MK_TableNoBorder" width=400px style="vertical-align: center;"|4> {{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Symbole-Map.jpg?m=1438328411 }}||

'''Die Symbole: '''

 ||<class="MK_TableNoBorder" width=270px style="vertical-align: top;">'''Waypoint'''<<BR>>A "right-click" with your mouse at the Map <<BR>>will place a Waypoint.||<class="MK_TableNoBorder" width=80px :>{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Symbol-WP.png?m=1438156066 }}||<class="MK_TableNoBorder" width=50px >||<class="MK_TableNoBorder" width=270px style="vertical-align: top;">'''Copter'''<<BR>>Position and orientation of the copter. Only to see with connected Copter <-> PC + !Satfix.||<class="MK_TableNoBorder" width=80px :>{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Symbol-Kopter.png?m=1438156055 }}||
 ||<class="MK_TableNoBorder"style="vertical-align: top;">'''POI - Point of Interest'''<<BR>>Can be generated from an existing waypoint by right-clicking.||<class="MK_TableNoBorder":>{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Symbol-POI.png?m=1438156056 }}||<class="MK_TableNoBorder">||<class="MK_TableNoBorder"style="vertical-align: top;">'''Target'''<<BR>>The copter will follow this point.See also "Target".||<class="MK_TableNoBorder":>{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Symbol-Target.png?m=1438327939 }}||
 ||<class="MK_TableNoBorder"style="vertical-align: top;">'''Failsafe-Point'''<<BR>>Can be generated from an existing waypoint by right-clicking.||<class="MK_TableNoBorder":>{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Symbol-Failsafe.png?m=1438156054 }}||<class="MK_TableNoBorder">||<class="MK_TableNoBorder"style="vertical-align: top;">'''Home'''<<BR>>Displays the !HomepPosition at which the copter is started.||<class="MK_TableNoBorder":>{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Symbol-Home.png?m=1438156055 }}||
 ||<class="MK_TableNoBorder"style="vertical-align: top;">'''Active Failsafe-Point'''<<BR>>See Failsafe-Point. Automatically activated when the copter is near this point.||<class="MK_TableNoBorder":>{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Symbol-Failsafe-Aktiv.png?m=1438156055 }}||<class="MK_TableNoBorder">||<class="MK_TableNoBorder" width=200px style="vertical-align: top;">'''Cursor'''<<BR>>Marks the spot on the map where you have make a "left click" with the mouse.||<class="MK_TableNoBorder":>{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Symbol-Curser.png?m=1438156054 }}||

<<BR>>

 '''Target''' 
  The target point is indicated visually on the map, where the copter will fly next. <<BR>>
  When you have placed some Waypoints on the map and fly now automatically this points, the next position where the copter have to fly will be marked by a target point.<<BR>>
  Also if the function [[en/PositionHold|PositionHold]] is activated you will see this point. When you now move the Nick/Roll stick on you r transmitter, you will move the target point. Here also the copter follows then that target point.
  
  


##############################################################################
<<BR>><<BR>><<BR>><<BR>><<BR>><<BR>>

##include_Entfernungen_begin  

= Distance =

If you have loaded a map and if you want to determining a distance between e.g. 2 points or the length and width of a field, you can do this quickly and easily.

 * place a waypoint there (by clicking the left mouse button) where you will start your measurement
 * then move the cursor (with your mouse) on the map 
 * in the "Titlebar" you can ow see the distance between the waypoint and the cursor
<<BR>>
 [[  http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/WP-Abst%C3%A4nde.png?m=1450437470 | {{ http://gallery3.mikrokopter.de/var/resizes/intern/KopterTool_ab_V2_0/OSD/WP-Abst%C3%A4nde.png?m=1450437472 }} ]]

##include_Entfernungen_end

<<BR>><<BR>><<BR>>
##############################################################################################################################

<<Anchor(Sprung1)>> 

= The Menubar =

Different settings can be made via the menu bar:<<BR>>

##############################################################################################################################


== File ==

{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/_en/Men%C3%BCleiste-Datei_en.jpg?m=1437731459 }}
<<BR>><<BR>>

Via '''File''' The following functions can be selected. <<BR>> 

=== Load Picture... ===

  Stored maps can be opened here anddisplayed in the map window.<<BR>>
  You can use also your own map if it is a ''.jpg'' or ''.mkz'' format with geodata. <<BR>>
  '''INFO:''' <<BR>>
  A ''.mkz'' file is a zipped file (like e.g. .zip) and includes 2 ''.jpg'' pictures. <<BR>>
  (See also [[en/MapTool|MikroKopter MapTool]]).
  

=== GeoTag... ===

  The key data of the GPS positions of a loaded image, can be seen here. If you use a .jpg picture without GPS positions you can insert it here then manually (if you know the values). The GPS positions are needed to locate the positions on the map.<<BR>>
  
  The setting window is looks like this: <<BR>>
  ||<class="MK_TableNoBorder">[[ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/_en/GeoTag_en.jpg?m=1437731647 | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/KopterTool_ab_V2_0/OSD/_en/GeoTag_en.jpg?m=1437731647 }} ]]||<class="MK_TableNoBorder">[[ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/GeoTag-01.jpg?m=1436456347 | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/KopterTool_ab_V2_0/OSD/GeoTag-01.jpg?m=1436456347 }} ]]||

  '''Info:''' <<BR>>
  If you safe a map with the ''!MikroKopter !MapTool'' the GPS positions are already safed in the map.<<BR>>
  (See also [[en/GeoTag|GeoTag]]).<<BR>>

  
<<Anchor(Sprung3)>>

=== Get online map ===

  The needed maps can be loaded and safed with our "!MikroKopter !MapTool". Please note that you need a internetconnection to open it.<<BR>>
  (See also [[en/MapTool|MikroKopter MapTool]])


=== How to... ===

  A "click" on this entry opens this wiki page. <<BR>>
  (An Internet connection is required)






<<BR>><<BR>><<BR>>
##############################################################################################################################
----

<<Anchor(Sprung4)>>

== GPX Log ==

{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/_en/Men%C3%BCleiste-GPS-Log_en.jpg?m=1437731460 }}
<<BR>><<BR>>

These functions can be selected in the menu '''"GPX Log"'''.

=== Logging Enabled ===

Here you can activate or deactivate the automatically logging of the telemetry data from your copter on your computer.  <<BR>><<BR>>

  {{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/_en/GPX-Log_AN_en.jpg?m=1437989000 }}
  {{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/_en/GPX-Log_AUS_en.jpg?m=1437989000 }}
<<BR>>

  ||<class="MK_TableNoBorder">If the logging is activ the program is waiting <<BR>>that you start and fly the copter ...||<class="MK_TableNoBorder">{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/_en/GPX-Log_warte_en.jpg?m=1437989001 }}||
  ||<class="MK_TableNoBorder">... then he record the telemetry data ...||<class="MK_TableNoBorder">{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/GPX-Log_logging.jpg?m=1430318070 }}||
  ||<class="MK_TableNoBorder">... and stop the recording when <<BR>> the copter is landed and switch off.||<class="MK_TableNoBorder">{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/_en/GPX-Log_gestopped_en.jpg?m=1437989001 }}||
  

=== Start Logging ===

  Manually start of the logging. The telemetry data will be stored in a file on the computer. 

=== Stop Logging ===

  Stops the logging of telemetry data. <<BR>>
  INFO: If the logging starts automatically you can not stop it manually.

=== Log AnalogDebug Values ===

  Enables the logging of !Analog Debug values in log file <<BR>>
  (e.g. !AngleNick, !AngleRoll, ACCNick, ACCRoll, .....)

=== View Log directory... ===

  Opens the folder in which the recorded log files were stored. 


<<BR>><<BR>><<BR>>
##############################################################################################################################
----
== Data Link ==

{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/_en/Men%C3%BCleiste-Datenverbindung_en.jpg?m=1437731459 }}
<<BR>><<BR>>

With '''"Data Link"''' you can activate '''"RX only"'''. If you activate this you can only receive Data from the copter.<<BR>>
A sending of data to the copter (like Waypoints) is then not possible.<<BR>>
You can use this if you need e.g. 2 computers to show the telemetry of the copter. Here only one computer can receive and send data from/to the copter.
If more computers can also send data to the copter the connection will break down. So the second use "RX only".



<<BR>><<BR>><<BR>>
##############################################################################################################################
----
== WayPoints ==

{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/_en/Men%C3%BCleiste-WegPunkte_en.jpg?m=1437731460 }}
<<BR>><<BR>>

Under '''"!WayPoints"''' you can do this.

=== Editor... ===

  Here you can open the waypoint editor. In this editor you can change all settings of the single waypoints, POIs or !FailSafe points.<<BR>>
  A description of this can be found at: '''[[#Sprung6|waypoint editor]].'''

=== Generator... ===

  With the ''Generator'' you can set automatically various waypoints pattern with different settings on the map.<<BR>>
  A description of the ''Generator'' you can find here: '''[[en/WaypointGenerator|Wegpunkt-Generator]]'''

=== Add MK Pos. to WP list ===

  If you use this entry or if you press the button "F9" on your computer, the current position of you r copter will be stored on the loaded map. <<BR>>
  Please note that this is only possible if there is a (wireless) connection between your copter and your computer.<<BR>>
  So you can fly your copter wherever you want and save quick and easy the current position.<<BR>>
  This waypoints you can save and also load whenever you want and fly again and again and again to the same position. <<BR>>
  






<<BR>><<BR>><<BR>>
##############################################################################################################################
----
== Display ==

{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/_en/Men%C3%BCleiste-Anzeige_en.jpg?m=1437991004 }}
<<BR>><<BR>>

These functions can be selected in the menu '''"Display"'''.


=== Draw Grid... ===

  Wit this feature you can display a grid or one/two circles on the map. The size of the grid or of the circles can be set as desired.<<BR>>
  A grid or cirle can help to see the dimensions of the map. A description of this can be found here: [[en/WaypointGenerator/DrawGrid|Draw Grid]].<<BR>>


=== Show Grid ===

  A created grid/circle can hereby be displayed/hidden.

=== Show track ===

  During the real flight you can see a track on the map where the copter is flying. <<BR>>
  (For this you need a (wireless) connection between copter and computer) 

=== Show camera shutter ===

  If you use e.g. "trigger all X meters" with the output 1 you can see when the output is triggering. Then you see in your map a little dot on the track.<<BR>>
  (For this you need a (wireless) connection between copter and computer)

=== Clear MK Track ===

  Deletes the recorded track on the map.

=== Speak telemetry data ===

  If you switch a function on your transmitter (e.g. altitude control, !PositionHold etc.) your computer will speak the telemetry data.

=== Show telemetry speech as text ===

  If you switch a function on your transmitter (e.g. altitude control, !PositionHold etc.) your computer will show the telemetry data.

=== Deviation map ===

  With this function you can open a new window where you see the GPS accuracy of the GPS reception. For this the copter must be outside on the ground and receive the satellites.<<BR>>
  In the center of the cross (at "0") you find the position of your copter. The circles indicate the variation in "meter". <<BR>>
  The accuracy depends on the number of satellites and the signal quality. The better the reception, the smaller the GPS deviations. With a smaller GPS deviations you will have a more accurate GPS function (like [[en/PositionHold|PositionHold]] etc.). <<BR>>
  Draws the line a large radius around the center point, the accuracy is insufficient (e.g. with a GPS shadowing by buildings or existing solar storms).
  In this case, you also have an inaccurate GPS function and the copter can fly e.g. with activated function ''!PositionHold'' in circles.
  

  [[ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/GPS-Abweichung.jpg?m=1430206889 | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/KopterTool_ab_V2_0/OSD/GPS-Abweichung.jpg?m=1430206889 }} ]]

=== Show BL info  ===

  The temperature and current of each BL-Ctrl (V2.0 or V3) can be displayed in the OSD Map.<<BR>>
  The indicator is red with disabled engines and black with running engines.<<BR>><<BR>>

  [[ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/OSD-Motoranzeige.jpg?m=1431008253 | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/KopterTool_ab_V2_0/OSD/OSD-Motoranzeige.jpg?m=1431008253 }} ]]<<BR>><<BR>>

  If you move the mouse over one of this BL-Ctrl, a display will show the I2C errors (if that occurred).<<BR>><<BR>>

  {{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/OSD-BL-I2C%20error.jpg?m=1431008360 }} <<BR>><<BR>>

 

=== Show output 1 state ===

  Display of the switching state of output OUT1.<<BR>>
  The following applies: number visible => output switched. No number => output open. <<BR>><<BR>>

  {{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Ausgang1.jpg?m=1430207858 }}


=== Show output 2 state ===

  Display of the switching state of output OUT2.<<BR>>
  The following applies: number visible => output switched. No number => output open. <<BR>><<BR>>

  {{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Ausgang2.jpg?m=1430207859 }}







<<BR>><<BR>><<BR>>
##############################################################################################################################
----
== GPS coordinates ==

{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/_en/Men%C3%BCleiste-GPS-Koordinaten_en.jpg?m=1437731460 }}
<<BR>><<BR>>
In this view, the current position of your !MikroKopter will be displayed (with longitude and latitude coordinates in decimal degrees).







<<BR>><<BR>><<BR>>
##############################################################################################################################

<<Anchor(Sprung2)>>

= Telemetry display =

The telemetry display is in the upper part of the "OSD". Here you can see telemetry data like !LiPo voltage, current consumption, altitude, speed etc. <<BR>><<BR>>

{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/_en/OSD-Telemetrie_en.jpg?m=1437995219 }}
<<BR>><<BR>><<BR>><<BR>>


'''On the left side this is the display for:''' <<BR>>
 
  {{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/_en/OSD-Telemetrie-links_en.jpg?m=1437995066 }}  
<<BR>><<BR>>

 1. '''Number of satellites''' <<BR>>
  The number of currently received satellites can be read here.<<BR>>
  For a "Satfix" we need minimum 6 satellites. Only then we can accurately determining the position of the !MikroKopter.

 2. '''Data Link active / passive''' <<BR>>
  Here you can see if you have a connection between your copter and the computer. <<BR>>
  You can use for the connection e.g. a Wi.232, Bluetooth or a !RangeExtender.
 
 3. '''Used Modus''' <<BR>>
  The activated GPS functions can be shown here: <<BR>>
  
  {{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/_en/OSD-Mode_und_CF_en.jpg?m=1436341815 }}
  
  If you see '''PH(manual)''' you use the function '''!PositionHold''' and you fly your copter manually by using the nick/roll stick.

 4. '''Flight time''' <<BR>>
  Here you can see the flight time. It starts with starting the motors and ends when you switch off the motors.

 5. '''Function buttons''' <<BR>>
  Through this buttons you can quickly open this following functions: <<BR>><<BR>>

  ||<class="MK_TableNoBorder">{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Button-SendWP.jpg?m=1436342535 }}||<class="MK_TableNoBorder">Sends all planed waypoints/POI/FailSafe points to your copter.||

  ||<class="MK_TableNoBorder">{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Button-ReceiveWP.jpg?m=1436342535 }}||<class="MK_TableNoBorder">Received all waypoints/POI/FailSafe points who are in your copter loaded.||

  ||<class="MK_TableNoBorder">{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Button-Home.jpg?m=1436342534 }}||<class="MK_TableNoBorder">Deletes the waypoints/POI/FailSafe points in your copter and causes the direct flight back to the starting position.||

  ||<class="MK_TableNoBorder"width=30px style="float:left">{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Button-FlyTo.jpg?m=1436342534 }}||<class="MK_TableNoBorder">Clicking this button opens the following window: <<BR>> [[ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/_en/Fliege_zu_en.jpg?m=1436437222 | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/KopterTool_ab_V2_0/OSD/_en/Fliege_zu_en.jpg?m=1436437222 }} ]]<<BR>><<BR>>Here you can practice either: <<BR>>- flying at a previously clicked point in the map <<BR>>or<<BR>>- perform an auto landing.<<BR>><<BR>>You can also select the altitude, climb rate, speed and orientation of the copter.||

  ||<class="MK_TableNoBorder">{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Button-WP-Generator.jpg?m=1436342550 }}||<class="MK_TableNoBorder">Opens the waypoint generator. More information can be found here: '''[[en/WaypointGenerator|Waypoint Generator]]'''||

  ||<class="MK_TableNoBorder">{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Button-L%C3%B6scheKopterspur.jpg?m=1436342534 }}||<class="MK_TableNoBorder">Deletes the yellow copter track on the map.||

  ||<class="MK_TableNoBorder">{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Button-ToggleZoom.jpg?m=1436342550 }}||<class="MK_TableNoBorder">Switch between the two views of an loaded map from the '''[[en/MapTool|MikroKopter MapTool]]'''.||

  ||<class="MK_TableNoBorder">{{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/Button-Simulator.jpg?m=1436342536 }}||<class="MK_TableNoBorder">Starts the flight simulator. With the simulator you can fly your waypoints virtual. During this flight the camera mount will tilt and the connected camera will trigger in the way you have programmed it your your waypoint flight. More information can be found here: '''[[en/MikroKopterTool-OSD/FlightSimulator|Flight Simulator]]'''||


 6. '''Altitude''' <<BR>>
  When the switch for the altitude on the transmitter is switched to the "ON" position, the target height is displayed blue.<<BR>>
  The current copter altitude (measured by the barometric pressure sensor) is displayed in large green numbers.

 7. '''Thrust''' <<BR>>
  At the bar graph, the movement of the throttle stick and the corresponding boost can be read.

 8. '''Speed''' <<BR>>
  Displays the current airspeed in m / s

 9. '''Triggering''' <<BR>>
  The number of switching operations of the switching output ''OUT1'' are shown here. <<BR>>
  This number normally should then match with the number of taken photos on your camera.<<BR>>
  (Assuming the camera is set correctly and triggers with the switching operations of the switching output ''OUT1'') 

 10. '''Display switching channel Out1 / Out2''' <<BR>>
  Here you can see which of the two switching channels is currently active.

<<BR>><<BR>><<BR>><<BR>>




'''Waypoint Info:''' <<BR>><<BR>>

During the waypoint flight you see here some informations: <<BR>><<BR>>

 {{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/_en/OSD-Telemetrie-WP_en.jpg?m=1438000643 }}
<<BR>><<BR>>


 1. '''P1 => Waypoint x of y''' <<BR>>
  Here the total number of transmitted waypoints (right) and the currently flown waypoint (left) is displayed.

 2. '''[s] => Waypoint time''' <<BR>>
  Each waypoint can be assigned a residence time. For this time the copter will stay at the waypoint. <<BR>>
  The retention period begins upon reaching the waypoint radius and count down backwards. 

 3. '''[m/s] => Airspeed''' <<BR>>
  The speed in which the next waypoint is approached can be set individually for each waypoint.<<BR>>
  Here you can see the speed.

 4. '''[m] => Waypoint altitude''' <<BR>>
  The height of the current waypoint is displayed.

 5. '''[m/s] => Waypoint climb rate''' <<BR>>
  If the next waypoint is higher or lower than the current, you can set the climb rate individually.<<BR>>
  Here you see then the speed of the climb rate.

<<BR>><<BR>><<BR>><<BR>>



'''Direction readings:''' <<BR>>

 {{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/OSD-Telemetrie-Richtung.jpg?m=1431068839 }}
<<BR>>

 The left display shows the direction and distance to the next waypoint / target. <<BR>>
 The right display indicates the direction and distance from the starting point of the copter (Home position) at the current position of the copter. <<BR>><<BR>>

 [[  http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/OSD-Telemetrie-Richtung_2.jpg?m=1431070701 | {{ http://gallery3.mikrokopter.de/var/resizes/intern/KopterTool_ab_V2_0/OSD/OSD-Telemetrie-Richtung_2.jpg?m=1431070702 }} ]]

<<BR>><<BR>><<BR>><<BR>>



'''Consumption values:''' <<BR>>

 {{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/OSD-Telemetrie-akku.jpg?m=1431079143 }}
<<BR>>

 1. '''Battery indicator''' <<BR>>
  The current battery voltage and consumption are shown here.

 2. '''GPX-Log''' <<BR>>
  Status indication of the recording progress of the log over the KopterTool. <<BR>>
  (See also [[#Sprung4|GPX Log]])







<<BR>><<BR>><<BR>>
##############################################################################################################################
----
== Alert messages ==

In case of a warning you will see a message at the OSD and the indicator turns red: <<BR>><<BR>>

 Example battery warning: <<BR>>

 {{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/OSD-Telemetrie-akku2.jpg?m=1431079143 }}
<<BR>>

 Error messages are displayed in the map below. Here are some examples: <<BR>>

 {{ http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/OSD-Error.jpg?m=1431079923 }}
<<BR>><<BR>>
 The exact meaning of the error codes can be found in the Wiki: [[en/ErrorCodes|ErrorCodes]]






<<BR>><<BR>><<BR>>
##############################################################################################################################



= Videos =

Waypoints Flight - Programmable speed: <<BR>><<BR>>

<<Vimeo(39140814)>> <<Vimeo(39145829)>>

<<BR>><<BR>><<BR>><<BR>>

Waypoint flight with POI: <<BR>><<BR>>

<<Vimeo(21275036)>>

(german) <<BR>><<BR>>

<<BR>><<BR>>

Waypoint flight with POI: <<BR>><<BR>>

<<Vimeo(28208102)>>

(english)

<<BR>><<BR>>

FollowMe-flight witht Wakeboarder: <<BR>><<BR>>

<<Vimeo(25288834)>>

-----