DocWiki

de/Transmitter/Jeti_DS16








Info

The here described settings and procedures are related to the current version 1.07 Jeti.
You can download the latest software directly from the homepage of Jeti: Homepage

Already finished model memories for the DS-16 as well as a suitable setting for the FlightCtrl can be downloaded further below "Example Setting - Download".

Jeti DS-16

Shoplink: Jeti DS-16

The DS-16 is a perfect transmitter for the MikroKopter. With this transmitter you are able to use all 12 channels of the FlightCtrl.

The data:

https://gallery3.mikrokopter.de/var/resizes/intern/DC-16_001/DS-16/DS-16.jpg?m=1410787530



INFO:

The Jeti-EX-Telemetry is only supported from FlightControl V2.1 and software version V0.90.

Selection buttons

On the DS-16 transmitter, the three buttons at the bottom right are used to move through the menus:

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Button.jpg?m=1409703095

(To enlarge -> click on the image)

Set transmitter + bind receiver

The easiest way is (for beginners, too) to control the MikroKopter in Mode2.
The function "Throttle" and "Yaw" is on the left control stick, "Nick" and "Roll" on the right control stick.

Set Stick Mode

You can get the Jeti DS-16 transmitter either way in mode 1/3 or 2/4. For the use of the MikroKopter the transmitter in mode 2/4 is recommended.

A subsequent change afterwards i.e. Mode1 to Mode2 is via an appropriate software possible. For this purpose the control sticks must be mechanically exchanged against each other. (See instruction: Changing the control mode)
The throttle stick has no spring and cannot be used with a spring in neutral position.

To change the mode you proceed as follows:

Step1:
Main menu
choose "System functions"

Step2:
and open the menu point
"Transmitter configuration"

Step3:
Switch here to
"Control mode"...

Step4:
...and set the desired
mode.

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Empfaenger/Empf_nger_einstellen_%20_1.jpg?m=1409703011

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Mode/Mode_einstellen_2.jpg?m=1409703024

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Mode/Mode_einstellen_3.jpg?m=1409703026

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Mode/Mode_einstellen_4.jpg?m=1409703026

(To enlarge -> click on the image)

Bind the receiver

The transmitter and the receiver need to be bind to each other.

IMPORTANT:
For the use on the MikroKopter a receiver with PPM sum signal is necessary. The receiver R9 which comes with the transmitter cannot be used.
Here you can use i.e. the RMK2 Duplex Receiveror the Rsat2.<BR>>

To bind the receiver you proceed as follows:

Update receiver

It could be possible that older RMK2 receiver provide only 8 channels. That you can change in the settings of the receiver.
If the change to 12 channels is not possible for some reason, you can update the receiver with the following software: Download
(Description of the Update: Link)

To set the receiver via the transmitter you proceed as follows:

Step1:
In the main menu
choose "System functions"...

Step2:
...down to "Jetibox" and
open it with "OK"...

Step3:
...switch with a right-click
to "RX" ...

Step4:
...down to "Receiver Type"
-

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Empfaenger/Empf_nger_einstellen_%20_1.jpg?m=1409703011

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Empfaenger/Empf_nger_einstellen_%20_2.jpg?m=1409703013

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Empfaenger/Empf_nger_einstellen_%20_4.jpg?m=1409703015

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Empfaenger/Empf_nger_einstellen_%20_5.jpg?m=1409703016

(To enlarge -> click on the image)

Step5:
Down to
"MeasureOrSetting"...

Step6:
...right to the
sub-menu "Main Setting"...

Step7:
...down to menu point
"OutputChannelCnt" ...

Step8:
...and change here to "PPM12"
- Done!

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Empfaenger/Empf_nger_einstellen_%20_6.jpg?m=1409703017

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Empfaenger/Empf_nger_einstellen_%20_7.jpg?m=1409703019

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Empfaenger/Empf_nger_einstellen_%20_8.jpg?m=1409703021

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Empfaenger/Empf_nger_einstellen_%20_9.jpg?m=1409703022

(To enlarge -> click on the image)

KopterTool

Is the receiver addressed properly and receives the telemetry data, Jeti Satellite need to be set in the settings. An additional checkmark should be set at Telemetry: Speak all events.

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Jeti-EX_en.jpg?m=1409703092

(To enlarge -> click on the image)

New model memory

So that you can use the MikroKopter an appropriate model memory need to be set before.
Here you assign the channels to the control sticks, switches, buttons etc.

Channels

This is an example assignment of the channels and is used in the following descriptions. Any other assignment is possible.

-

Channel 1

-

=>

Throttle

-

Channel 2

-

=>

Roll

-

Channel 3

-

=>

Nick

-

Channel 4

-

=>

Yaw

-

Channel 5

(Poti1)

=>

Function Hold Altitude

-

Channel 6

(Poti2)

=>

Function GPS (PositionHold / ComingHome)

-

Channel 7

(Poti3)

=>

Zoom

-

Channel 8

(Poti4)

=>

Function CareFree

-

Channel 9

(Poti5)

=>

Camera tilt (Nick)

-

Channel 10

(Poti6)

=>

Camera tilt (Roll)

-

Channel 11

(Poti7)

=>

Trigger camera & LED on/off

-

Channel 12

(Poti8)

=>

Function motor safety



Set model memory

To have no mixers or other links in the new model we choose here directly the model type Truck&Boat.
The switches on the transmitter will be set in the new model memory in that way, that all switches are "OFF" when pointing away from you.
To achieve this, the function of some channels need to be reversed with Rev..

In our example, all channels have been reversed with "Rev." but not channel 1+3.

Step1:
Choose in the main menu "Choose model/
-modification"...

Step2:
...and choose there "New model"

Step3:
Choose here first at all
the model name...

Step4:
...set it and confirm with
"OK"

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Modellspeicher/Modellspeicher_neu_%20_1.jpg?m=1409703028

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Modellspeicher/Modellspeicher_neu_%20_2.jpg?m=1409703029

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Modellspeicher/Modellspeicher_neu_%20_3.jpg?m=1409703031

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Modellspeicher/Modellspeicher_neu_%20_4.jpg?m=1409703031

(To enlarge -> click on the image)

Step5:
Choose now "Truck+Boat"
and with the double arrow
to the next window...

Step6:
...do not make changes here
continue with the double arrow
to the next window

Step7:
Here now the
channels will be set
-

Step8:
With "Enter" we edit the
the first entry
-

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Modellspeicher/Modellspeicher_neu_%20_5.jpg?m=1409703033

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Modellspeicher/Modellspeicher_neu_%20_6.jpg?m=1409703035

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Modellspeicher/Modellspeicher_neu_%20_7.jpg?m=1409703035

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Modellspeicher/Modellspeicher_neu_%20_8.jpg?m=1409703037

(To enlarge -> click on the image)

Step9:
First the name
need to be set and
confirmed with "OK"

Step10:
then change to
Control and you
can assign it

Step11:
Here now you can
choose the desired Control

Step12:
Here we choosed the throttle-stick
(if necessary:
change direction with Rev.)

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Modellspeicher/Modellspeicher_neu_%20_9.jpg?m=1409703037

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Modellspeicher/Modellspeicher_neu_%20_11.jpg?m=1409703039

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Modellspeicher/Modellspeicher_neu_%20_12.jpg?m=1409703041

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Modellspeicher/Modellspeicher_neu_%20_13.jpg?m=1409703041

(to enlarge -> click on the image)

Step13:
With the "+"
you set new Geber
as shown here

Step14:
Are all 12 channels
assigned, it should
look in that way

Step15:
At the end with "YES"
confirm the new model...
-

Step16:
...DONE!
-
-

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Modellspeicher/Modellspeicher_neu_%20_14.jpg?m=1409703042

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Modellspeicher/Modellspeicher_neu_%20_15.jpg?m=1409703043

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Modellspeicher/Modellspeicher_neu_%20_16.jpg?m=1409703044

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Modellspeicher/Modellspeicher_neu_%20_17.jpg?m=1409703046

(To enlarge -> click the image)

Telemetry Settings

With this transmitter, like the Graupner HoTT System, you are able to get warning messages for the individual functions via voice output.
The necessary voice file need to be downloaded to the transmitter.
The voice files need to be copied in the transmitter to \Audio\en and \Voice\en.
(Different languages need to be copied correspondingly, i.e. \fr \nl \es)

Download

Here you can download the appropriate voice file: Deutsch - Download + English - Download

The voice files are listed here:
http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=132047&g2_serialNumber=3

Assign voice files

The voice files are assigned to the functions via a morse code. So that they are announced accordingly, you have to assign the newly copied voice files in the transmitter.

Step1:
In the main menu choose
"Stopwatch/Sensors"
...

Step2:
...and the entry
"Alarms"
-

Step3:
Open the first
entry with "Enter"...
-

Step4:
...and switch on the alarm with "Enter"

-

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Morsecode/Morsecode_neu_%20_1.jpg?m=1409703047

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Morsecode/Morsecode_neu_%20_2.jpg?m=1409703048

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Morsecode/Morsecode_neu_%20_3.jpg?m=1409703049]

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Morsecode/Morsecode_neu_%20_4.jpg?m=1409703051

(To enlarge -> click on the image)

Now each morse code sign from A to Z will be displayed with the appropriate voice file:
https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Morsecode/Morsecode_neu_%20_5.jpg?m=1409703051

(To enlarge -> click on the image)

Now you need to assign to each morse code the before copied voice files new.

You proceed as follows:

Morse code A ".-" contains the voice file "_MK_A_MK.wav.
Morse code B "-..." contains the voice file "_MK_B_CALIBRATE.wav.
Morse code C "-.-." contains the voice file "_MK_C_STARTING.wav.
.
.
.
Morse code Z "--.." contains the voice file "_MK_Z_GPS_FIX.wav.

After selecting the file which need to be modified the available language files appear. Now you can look through all files using the double arrow.
Here are all voice files listed:

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Morsecode/Morsecode_neu_%20_7.jpg?m=1409703054 https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Morsecode/Morsecode_neu_%20_8.jpg?m=1409703055 https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Morsecode/Morsecode_neu_%20_9.jpg?m=1409703057 https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Morsecode/Morsecode_neu_%20_10.jpg?m=1409703059 https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Morsecode/Morsecode_neu_%20_11.jpg?m=1409703061 https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Morsecode/Morsecode_neu_%20_12.jpg?m=1409703062

(To enlarge -> click on the image)

Create voice files by yourself

For that reason that the voice file is in wav-format you can create files by yourself.
This you can do i.e. with the Windows Audiorecorder and a microphone.
You can do those files also with a "Text-To-Speach" generator from the Internet (i.e.: Link).

Play VARIO-altitude regulator via loudspeaker

Like the voice output, a tone can be played via the loudspeaker automatically with switched on altitude regulator on the transmitter for climbing and falling.

Step1:
In the main menu choose
"Stopwatch/Sensors"

Step2:
Choose there the entry
"Vario"
-

Step3:
Open the entry
"Mode" with "Enter"...
-

Step4:
...and choose "Value EX"
-
-

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Anzeige/2.jpg?m=1409703077

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Vario/Vario_einstellen_%20_1.jpg?m=1409703064

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Vario/Vario_einstellen_%20_2.jpg?m=1409703064

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Vario/Vario_einstellen_%20_3.jpg?m=1409703066

(To enlarge -> click on the image)

Step5:
Change here the
"Dead zone"
in "-1" and "1"

Step6:
Next step as
"Parameter EX" ...
-

Step7:
...choose "Vario"
-
-

Step8:
Done!
-
-

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Vario/Vario_einstellen_%20_4.jpg?m=1409703067

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Vario/Vario_einstellen_%20_5.jpg?m=1409703068

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Vario/Vario_einstellen_%20_6.jpg?m=1409703069

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Vario/Vario_einstellen_%20_7.jpg?m=1409703070

(To enlarge -> click on the image)

Telemetry in the display

Like with the Graupner HoTT System, you can display telemetry values on the main screen.
The data which need to be displayed in the main screen you can put together by yourself.

Step1:
The main menu looks like in that way
without displayed telemetry

Step2:
In the main menu choose
"Stopwatch/Sensors"...
-

Step3:
... and choose "Display telemetry"

-

Step4:
Here now choose
with the "+" button
the values

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Anzeige/1.jpg?m=1409703076

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Anzeige/2.jpg?m=1409703077

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Anzeige/3.jpg?m=1409703079

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Anzeige/4.jpg?m=1409703079

(To enlarge -> click on the image)

Then select the following telemetry values:

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Anzeige/5.jpg?m=1409703080

(To enlarge -> click on the image)

The example settings look in that way:

Page1:
Display with:
Voltage, Capacity, Current,
Altitude, Distance, Home-Dir

Page2:
Display with:
Jetibox, rcvd. satellites,
Speed

Page3:
Display with:
ErrorCode, Max.Temp.,
Magn.field

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Anzeige/6.jpg?m=1409703082

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Anzeige/7.jpg?m=1409703083

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/Anzeige/8.jpg?m=1409703084

(To enlarge -> click on the image)

Example Setting - Download

Model memory for transmitter

(!) Already pre-made model memories with the above described channel- and telemetry settings can be downloaded here.
The model memories 1+2 differ only in the use of the camera triggering (3-way switch for LANC or button for the Shuttercable).
Everything else is identical.

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/DS-16/DS-16-Belegung-Modellspeicher-1.jpg?m=1409705233

https://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/DS-16/DS-16-Belegung-Modellspeicher-2.jpg?m=1409705235

Download Model memory 1

Download Model memory 2

(To enlarge -> click on the image)

After downloading the files (0001Mikr.jsn or 0002Mikr.jsn), you can copy them directly in the transmitter into the folder /Model .
If you use a camera with the trigger on a button as well as the LANC, you can save both model memories in the transmitter.
Here you need to switch only between the both model memories , depending on the use.
How to read or import model memories from the transmitter can be read in the instruction manual on page 93.

<!> The channel assignment is like listed above.
Using this model memories you must set the functions / channels in the FlightCtrl.
(Or download the setting for the FlightCtrl listed below)

TIPP: Who uses a different mode rather than Mode 2, can also use the model memory.
After the import of the model memories you need to set the desired mode (1,3,4) by yourself.

Settings FlightCtrl

An appropriate setting for the FlightCtrl can be downloaded here: Download
The settings for the channels and the model memories need to be adjusted accordingly for the DS-16.

To import the settings into the FlightCtrl, open the settings in the KopterTool.
Here you "click" now on the button Load in the lower bar and open the downloaded setting.
With a click on the button Write you transfer the setting into the FlightCtrl.

<!> ATTENTION:
The FlightCtrl has 5 memories (Settings). If you want to use the downloaded setting in all memories, you need to choose every memory (1-5) and save the setting with Write.
After writing the setting into the FlightCtrl you must (if not already done) set the right mixer (Link).





SinglePoint + Fixed/Relative Waypoints save/load with the transmitter

With Jeti remote control you have the option to:


How to do this, can be read here: SinglePoint + Fixed/Relative Waypoints


DocWiki: en/Transmitter/Jeti_DS16 (zuletzt geändert am 02.11.2020 10:25 durch LotharF)