DocWiki

de/Transmitter/Graupner_SingleWP








SinglePoint + Fixed/Relative Waypoints

With an appropriate remote control you have the option to:


SinglePoint Waypoints
When saving "single point" waypoints, teh position of the Copters can be saved directly and reloaded.
So you can fly over and over again at the same position.
Logged are In this case:


Fixed/Relative Waypoints
A planned waypoints flight, can be stored on the SD card in the copter.
Such an waypoit flight you can open and fly over and over again via the transmitter.
You can load such a waypoint flight Fixed. Here you load the planed waypoint flight exactly for the position for which it was planned.
Or you load such a waypoint flight Relative. Here you can open and place the Waypoint flight at the place where the copter actually is.

See also below under Fixed/Relative Waypoints.





Suitable transmitter

You can use this functions only with an Graupner HoTT or an Jeti transmitter.
Using other remote control models is currently not possible





Number of single points / WP lists to be saved

In the free version you can save up to 4 !Single Points or Fix/Relative waypoints lists in your copter.

And if you buy the commercial license it is already included to save up to 99 SinglePoints or Fix/Relative lists in your copter.





SinglePoint place + load

Operation via Graupner HoTT

It is operated via the touch-buttons SET and ESC and
the touch-buttons left/right/up/down on your transmitter.

http://gallery3.mikrokopter.de/var/albums/intern/HoTT/MC-32-SET-ESC.png?m=1438872684
(example image MC-32 HoTT)




1. open the Text-Telemetry

The menu to save and load a SinglePoints can be found in the Text-Telemetry.

press the touch-buttons ESC a little longer ...

... until the TELEMETRIE opens. Select here the menu SETTING & DATA VIEW ...

... and open it with the touch-button SET ...

... then "click" to the right until the Text-Telemetry is displayed.

http://gallery3.mikrokopter.de/var/albums/intern/HoTT/Button-ESC.jpg?m=1439277350

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/thumbs/intern/HoTT/Display-MC32-TELEMETRIE_en.jpg?m=1438861864

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/HoTT/Button-SET.jpg?m=1439277351

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/thumbs/intern/HoTT/Display-Telemetrie-einfach.jpg?m=1438861922

Once you open the text telemetry, you can reach different subwindows from here.
To navigate through the subwindows use the left/right/up/down touch-buttons.




2. place and save a SinglePoint

Fly your copter to the place in the air where you will save the waypoint and ...

... change in the Text-Telemetrie with the left/right buttons to
Store single Position ...

... select with up / down the desired memory location ...

... and save it with the touch-button SET.

http://gallery3.mikrokopter.de/var/thumbs/intern/HoTT/Display-StoreSinglePos.jpg?m=1438861921

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/thumbs/intern/HoTT/Display-StoreSinglePos1.jpg?m=1438861921

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/thumbs/intern/HoTT/Display-StoreSinglePos2.jpg?m=1438861939




3. load SinglePoint

To load already individually saved "SinglePoint" waypoints...

... change in the Text-Telemetrie with the left/right buttons to
Load single Position ...

... select with up / down the desired memory location ...

... and load it with the touch-button SET.

http://gallery3.mikrokopter.de/var/thumbs/intern/HoTT/Display-LoadSinglePos.jpg?m=1438861860

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/thumbs/intern/HoTT/Display-LoadSinglePos1.jpg?m=1438861861

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/thumbs/intern/HoTT/Display-LoadSinglePos2.jpg?m=1438861861




4. fly automatically to a SinglePoint

To start then the automatic waypoint flight to the SinglePoint, proceed as follows:











Operation via Jeti

It is operated via the buttons left/right/up/down on your Jeti-Box.

http://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/JetiBox/jetibox_mini.png?m=1439804816
(example image JetiBox Mini)




1. open the Text-Telemetry

The menu to save and load a SinglePoints can be found in the Text-Telemetry.

After switching on the copter you see "Tx" in the display.
With a "click" to the right ...

... you change to "Rx". And with another "click" to the right ...

... to Mx.

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-Tx.jpg?m=1439814444

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-Rx.jpg?m=1439814422

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-Mx.jpg?m=1439814420

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_runter4.png?m=1439816704

A "click" down opens the Text-Telemetry ->

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-ErstesFenster.jpg?m=1439814369



Once you open the text telemetry, you can reach different subwindows from here.
To navigate through the subwindows use the left/right/up/down buttons.




2. place and save a SinglePoint

Fly your copter to the place in the air where you will save the waypoint and ...

... change in the Text-Telemetrie with the left/right buttons to
Save singl. Point ...

... a "click" downward opens the submenu ...

... and select with up / down the desired memory location.

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-SaveSinglePoint1.jpg?m=1439814441

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-SaveSinglePoint2.jpg?m=1439814442

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-SaveSinglePoint3.jpg?m=1439814442

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_runter4.png?m=1439816704

A "click" to the right stores the waypoint ->

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-SaveSinglePoint4.jpg?m=1439814443




3. load SinglePoint

To load already individually saved "SinglePoint" waypoints...

... change in the Text-Telemetrie with the left/right buttons to
Load singl. Point ...

... a "click" downward opens the submenu ...

... select with up / down the desired memory location.

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-LoadSinglePoint1.jpg?m=1439814369

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-LoadSinglePoint2.jpg?m=1439819024

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-LoadSinglePoint3.jpg?m=1439814370

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_runter4.png?m=1439816704

A "click" to the right then opens the waypoint ->

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-LoadSinglePoint4.jpg?m=1439814370




4. fly automatically to a SinglePoint

To start then the automatic waypoint flight to the SinglePoint, proceed as follows:






Fixed/Relative Waypoints

Operation via Graupner HoTT

It is operated via the touch-buttons SET and ESC and
the touch-buttons left/right/up/down on your transmitter. How to save an on your computer planed waypoint flight on the copter you can see here: WP-Editor

http://gallery3.mikrokopter.de/var/albums/intern/HoTT/MC-32-SET-ESC.png?m=1438872684
(example image MC-32 HoTT)




1. open the Text-Telemetry

The menu to save and load a SinglePoints can be found in the Text-Telemetry.

press the touch-buttons ESC a little longer ...

... until the TELEMETRIE opens. Select here the menu SETTING & DATA VIEW ...

... and open it with the touch-button SET ...

... then "click" to the right until the Text-Telemetry is displayed.

http://gallery3.mikrokopter.de/var/albums/intern/HoTT/Button-ESC.jpg?m=1439277350

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/thumbs/intern/HoTT/Display-MC32-TELEMETRIE_en.jpg?m=1438861864

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/HoTT/Button-SET.jpg?m=1439277351

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/thumbs/intern/HoTT/Display-Telemetrie-einfach.jpg?m=1438861922

Once you open the text telemetry, you can reach different subwindows from here.
To navigate through the subwindows use the left/right/up/down touch-buttons.







2. load a waypoint flight (Fixed Positions)

To load saved waypoints flights ...

... change in the Text-Telemetrie with the left/right buttons to
Load Waypoints
(Fixed Positions)
...

... select with up / down the desired memory location ...

... and open it with the touch-button SET.

http://gallery3.mikrokopter.de/var/thumbs/intern/HoTT/Display-LoadFixWPs.jpg?m=1438861814

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/thumbs/intern/HoTT/Display-LoadFixWPs1.jpg?m=1438861814

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/thumbs/intern/HoTT/Display-LoadFixWPs2.jpg?m=1438861815



Example: We have planed a waypoint flight with 30° Rotation:

http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/WP-Sender/Wegpunkte-Planung-30%C2%B0%282%29.jpg?m=1439822340

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/WP-Sender/Load-Fix-Gebiet-30%C2%B0.jpg?m=1439548882

Planning on PC

Load on the field
Copter is anywhere




Or




3. load a waypoint flight (Relative Positions)

To load saved waypoints flights ...

... change in the Text-Telemetrie with the left/right buttons to
Load Waypoints
(Relative Positions)
...

... select with up / down the desired memory location ...

... and open it with the touch-button SET.

http://gallery3.mikrokopter.de/var/thumbs/intern/HoTT/Display-LoadRelativeWPs.jpg?m=1438861816

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/thumbs/intern/HoTT/Display-LoadRelativeWPs2.jpg?m=1438861816

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/thumbs/intern/HoTT/Display-LoadRelativeWPs3.jpg?m=1438861818



Example: We have planed a waypoint flight with 30° Rotation:

http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/WP-Sender/Wegpunkte-Planung-30%C2%B0%282%29.jpg?m=1439822340

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/WP-Sender/Load-Relativ-Gebiet2.jpg?m=1439548919

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/WP-Sender/Load-Relativ-Gebiet-30%C2%B0_2.jpg?m=1439548919

Planning on PC

Load on the field.
Copter is anywhere
and pointing toward 0 °.

If you turn the copter in a
desired direction
(Here, for example, 90°)
and if you load the WP flight new,
the WP flight will also turn with the copter.




4. fly automatically Relative Waypoints

To start then the automatic waypoint flight, proceed as follows:











Operation via Jeti

It is operated via the buttons left/right/up/down on your Jeti-Box.


How to save an on your computer planed waypoint flight on the copter you can see here: WP-Editor

http://gallery3.mikrokopter.de/var/albums/intern/DC-16_001/JetiBox/jetibox_mini.png?m=1439804816
(example image JetiBox Mini)




1. open the Text-Telemetry

The menu to save and load a waypoint flight (Fixed/Relative) can be found in the Text-Telemetry.

After switching on the copter you see "Tx" in the display.
With a "click" to the right ...

... you change to "Rx". And with another "click" to the right ...

... to Mx.

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-Tx.jpg?m=1439814444

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-Rx.jpg?m=1439814422

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-Mx.jpg?m=1439814420

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_runter4.png?m=1439816704

A "click" down opens the Text-Telemetry ->

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-ErstesFenster.jpg?m=1439814369



Once you open the text telemetry, you can reach different subwindows from here.
To navigate through the subwindows use the left/right/up/down touch-buttons.




2. load a waypoint flight (Fixed Positions)

To load saved waypoints flights ...

... change in the Text-Telemetrie with the left/right buttons to
Save singl. Point ...

... a "click" downward opens the submenu ...

... and select with up / down the desired memory location.

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-LoadWP-Fixed1.jpg?m=1439814389

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-LoadWP-Fixed2.jpg?m=1439814390

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-LoadWP-Fixed3.jpg?m=1439814390

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_runter4.png?m=1439816704

Ein "Klick" nach rechts speichert dann den Wegpunkt ->

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-LoadWP-Fixed4.jpg?m=1439814392



Example: We have planed a waypoint flight with 30° Rotation:

http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/WP-Sender/Wegpunkte-Planung-30%C2%B0%282%29.jpg?m=1439822340

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/WP-Sender/Load-Fix-Gebiet-30%C2%B0.jpg?m=1439548882

Planning on PC

Load on the field
Copter is anywhere




Or




3. load a waypoint flight (Relative Positions)

To load saved waypoints flights ...

... change in the Text-Telemetrie with the left/right buttons to
Load singl. Point ...

... a "click" downward opens the submenu ...

... and select with up / down the desired memory location.

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-LoadWP-Relative1.jpg?m=1439814416

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-LoadWP-Relative2.jpg?m=1439814417

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-LoadWP-Relative3.jpg?m=1439814417

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_runter4.png?m=1439816704

A "click" to the right opens the waypoint ->

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/JetiBox/Jeti-LoadWP-Relative4.jpg?m=1439814419

Example: We have planed a waypoint flight with 30° Rotation:

http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/WP-Sender/Wegpunkte-Planung-30%C2%B0%282%29.jpg?m=1439822340

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/WP-Sender/Load-Relativ-Gebiet2.jpg?m=1439548919

http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button/Pfeil_rechts4.png?m=1439279576

http://gallery3.mikrokopter.de/var/albums/intern/KopterTool_ab_V2_0/OSD/WP-Sender/Load-Relativ-Gebiet-30%C2%B0_2.jpg?m=1439548919

Planning on PC

Load on the field.
Copter is anywhere
and pointing toward 0 °.

If you turn the copter in a
desired direction
(Here, for example, 90°)
and if you load the WP flight new,
the WP flight will also turn with the copter.




4. fly automatically Fixed Waypoints

To start then the automatic waypoint flight, proceed as follows:






Airspeed between the points

If you load a SinglePoint waypoint and fly automatically to it, the airspeed is 5m/s (standard in the settings). But you can change the speed in the KopterTool via Navi-Ctrl2.
There you will find then the entry Single WP speed.

If you will not have a fixed speed you can also use e.g. a potentiometer on your transmitter to change it manually.To do this you need a free channel on your transmitter. This channel you set to the potentiometer on your transmitter and you set this channel also under Single WP speed (as Poti).

Altitudes between the single points:

You can fly with your copter to different places in different altitudes to save a SinglePoint. If you fly then between the points, the copter will fly in a direct line between them.

Here the MK flew to two points and thy were stored via the transmitter.
Then the points were called and the MK flew automatically between these points (eight times):

http://gallery3.mikrokopter.de/var/albums/tech/SinglePoint_GE1.gif?m=1409714430


<<BR>

Video

https://www.youtube.com/watch?v=l4VKuqAP-G0&list=UUXv7l7VoJSViTQ6skMGmuSg

https://www.youtube.com/watch?v=dhkolSD-zf8&list=UUXv7l7VoJSViTQ6skMGmuSg

(Load / save positions)

https://www.youtube.com/watch?v=uGK4jGf-QiA&list=UUXv7l7VoJSViTQ6skMGmuSg

(Save a camera track)

DocWiki: en/Transmitter/Graupner_SingleWP (zuletzt geändert am 17.02.2020 10:23 durch LotharF)