#acl AdminGroup:read,write,revert EditorsGroup:read,write,revert All:read

##############################################################################
##############################################################################

## DE-EN_Sprachflaggen

{{{#!wiki language_selector/de
[[ de/MK-Parameter | {{ http://www.mikrokopter.de/addons/shared_addons/themes/mk3/img/flag_ger.png }}]]
}}}

###########################################################################
<<BR>><<BR>><<BR>><<BR>><<BR>>
<<TableOfContents>>
<<BR>><<BR>>
###########################################################################
###########################################################################
<<BR>>


= Vorwort =

All settings are made via the '''Settings button''' in the free '''[[de/MikroKopterTool|MikroKopter-Tool]]'''. 

116/5000
Assigning the channels to the functions is done with just a few entries. So that the UAV is already ready to fly.<<BR>>
A ''Fine-tuning'' can be done using other parameters. However, this is usually not necessary. 


INFO: <<BR>>
The flight control has a total of five memory locations ~-(Parameterset => Settings)-~.<<BR>>
Each storage location can be set individually ~-(e.g. for Servo- or Brushless-Gimbal)-~.<<BR>>
The required storage space can then be activated via the remote control ~-([[#Sprung1|see ''Select parameter set via the transmitter'')]]-~.
<<BR>>

 '''A description of the individual setting pages can be called up via the selection above'''

<<BR>><<BR>><<BR>><<BR>><<BR>>
##############################################################################
----

= Overview =

##/////////////////////////////////////////////////////////////////////////
## Bild "EasySetup_Details" rechts

{{{#!html
<div style="float: right; margin-left: 15px; margin-right: 50px;">
}}}
{{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Tool/Setting/EasySetup/EN_EasySetup_Details.jpg?m=1505220052 }}
{{{#!html
</div>
}}}
##/////////////////////////////////////////////////////////////////////////
<<BR>>
 The setting window is divided into 4 areas: <<BR>>
 1 - menu selection <<BR>>
 2 - Adjustment <<BR>>
 3 - Channel Quick View <<BR>>
 4 - Save and load


<<BR>><<BR>><<BR>><<BR>><<BR>>
##############################################################################
----

== Menu selection ==

##/////////////////////////////////////////////////////////////////////////
## Bild "Standard-ExpertView_Details" rechts

{{{#!html
<div style="float: right; margin-left: 15px; margin-right: 50px;">
}}}
{{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Tool/Setting/Other/EN_Standard-ExpertView_Details.jpg?m=1505289111 }}
{{{#!html
</div>
}}}
##/////////////////////////////////////////////////////////////////////////
<<BR>>

 The most important settings that are necessary for the basic setting can be selected in the standard view. <<BR>>
 If you activate the ''Expert view'' ~-(in the lower bar)-~ you get additional setting options. <<BR>>
 INFO: <<BR>>
 The '' Expert view '' view and a changing of other parameters is usually not necessary. <<BR>>
 The adjustment of preset parameters can improve the flight characteristics, but also worsen them.



<<BR>><<BR>><<BR>><<BR>><<BR>>
##############################################################################
----

== Adjustment ==

##/////////////////////////////////////////////////////////////////////////
## Bild "EasySetup-small2" rechts

{{{#!html
<div style="float: right; margin-left: 15px; margin-right: 50px;">
}}}
{{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Tool/Setting/EasySetup/EN_EasySetup-small2.jpg?m=1505806929 }}
{{{#!html
</div>
}}}
##/////////////////////////////////////////////////////////////////////////
<<BR>>

 Depending on the selected menu, different settings are possible. <<BR>>
 The display of the settings depends on the menu selection''.


<<BR>><<BR>><<BR>><<BR>><<BR>><<BR>>
##############################################################################
----


== Channel Quick View ==

 The channels available on the remote control are assigned to different encoders ~-(Switch, Button, Slider, etc.)-~. <<BR>>
 These channels can then be assigned to the individual functions of the !MikroKopter. <<BR>>
 For some functions, either a fixed value, a POTI or a direct channel can be set. <<BR>>
  
 Via the settings, 8 channels can be arbitrarily assigned to the 8 available "POTI" ~-(tab ''Channels'')-~. <<BR>>
 In the "quick channel view" you have a simple overview of the allocation". 
<<BR>>

 {{ http://gallery3.mikrokopter.de/var/resizes/intern/MK-Tool/Setting/Other/EN_PotiChannelBar.jpg?m=1500537081 }}<<BR>>
 ~-Example: "P3" (Poti3) <-> "Ch10" (Kanal10)-~


<<BR>><<BR>><<BR>>
##############################################################################
----

== Save and load ==

 In the lower bar you have different options such as Parameter writing, reading etc. <<BR>>
<<BR>>

 {{ http://gallery3.mikrokopter.de/var/resizes/intern/MK-Tool/Setting/Other/EN_Buttons.jpg?m=1500537080 }}

<<BR>>


 * Button '''Help'''
   * Opens the corresponding wiki website with the description of the open setting

 * Button '''Load'''
  * Loading a parameter set saved on the PC

 * Button '''Save'''
  * Saves the current settings of the opened parameter set to the PC

 * Selection box '''Parameters et'''
  * Selection of the parameter set (setting) to be set<<BR>>
  Different settings can be saved in 5 memory locations (parameter set).<<BR>>
  An individual name can be set for each parameter set.

 * Button '''Reset'''
  * Resetting the settings of the current parameter set to the delivery state

 * Button '''Read'''
  * Reads the current settings of the opened parameter set from the copter

 * Button '''Write'''
  * Writes the current settings into the selected parameter set in the copter

 * Button '''OK'''
  * Closes the setting window. <<BR>>
  ~-INFO: <<BR>>
  If changes have not yet been transferred to the Kopter<<BR>>
  and you close the window, a confirmation dialog appears:-~ <<BR>>
   {{ http://gallery3.mikrokopter.de/var/thumbs/intern/KopterTool_ab_V2_0/Einstellungen/Warnung.jpg }}



<<BR>><<BR>><<BR>>
##############################################################################
----


<<Anchor(Sprung1)>>

= Select parameter set via the transmitter =

 The flight control contains 5 memory locations ~-(Parameterset)-~ which can be set differently. <<BR>>
 The individual parameter sets in the !MikroKopter can be activated by remote control. <<BR>><<BR>>

 First select the desired parameter set (1-5) and hold the position ...<<BR>>
 ... then you activate the inputt (A). <<BR>>
 The copter acknowledges the input with 1-5 beeps and the setting that is now active appears briefly in the telemetry display.


##/////////////////////////////////////////////////////////////////////////
## Bild "Setting1-5" rechts

{{{#!html
<div style="float: right; margin-left: 15px; margin-right: 50px;">
}}}
{{ http://gallery3.mikrokopter.de/var/thumbs/intern/HoTT/Stick/Setting1-5.jpg?m=1505302776 }}<<BR>>
~-Beispiel: Mode2-~
{{{#!html
</div>
}}}
##/////////////////////////////////////////////////////////////////////////

 Here are the individual embroidery positions: 
    * '''Setting 1''' => <<BR>>
    __Roll left + Nick center__ - '''plus''' - __throttle up + yaw left__ <<BR>>
    * '''Setting 2''' => <<BR>>
    __Roll left + Nick up__ - '''plus''' - __throttle up + yaw left__ <<BR>>
    * '''Setting 3''' => <<BR>>
    __Roll center + Nick up__ - '''plus''' - __throttle up + yaw left__ <<BR>>
    * '''Setting 4''' => <<BR>>
    __Roll right + Nick up__ - '''plus''' - __throttle up + yaw left__ <<BR>>
    * '''Setting 5''' => <<BR>>
    __Roll right + Nick center__ - '''plus''' - __throttle up + yaw left__ <<BR>>


 INFO: <<BR>>
 The picture on the right shows the upper text description of the embroidery positions on a transmitter in "mode 2".<<BR>>
 If a transmitter with a different "mode" is used, the stick operations look different !!! <<BR>>
 The __text description__ above is to be observed here !!!




<<BR>><<BR>><<BR>>
##############################################################################
----






= Info =


{{{#!wiki caution 
'''Changing the settings can help fine-tune the copter. <<BR>>
But not if there are flight problems on the copter!'''<<BR>><<BR>>

With a few exceptions, __every__ MikroKopter can already be flown with the standard settings! <<BR>>
Only the channels for the individual functions have to be entered!

If the copter does not fly properly with the standard settings, this could be due to an error when assembling the copter or incorrectly laid cables (magnetic errors). Here the structure of the copter should be examined first.<<BR>><<BR>>

All settings are preset. If changes are made to the settings, it should be ensured that valid data is entered.<<BR>>
If a setting is loaded with incorrect values due to incorrect operation, the Kopter may malfunction or crash!<<BR>><<BR>>

The settings should '''NOT''' be changed during the flight (e.g. using wireless connection)! <<BR>>
The !MikroKopter can crash! <<BR>>
So always land first, turn off the engines, then load / write settings and start again.<<BR>><<BR>>
 
}}} 



----