#acl AdminGroup:read,write,revert EditorsGroup:read,write,revert All:read

##############################################################################
##############################################################################

## DE-EN_Sprachflaggen

{{{#!wiki language_selector/de
[[ de/MK-Parameter/Output | {{ http://www.mikrokopter.de/addons/shared_addons/themes/mk3/img/flag_ger.png }}]]
}}}

###########################################################################
<<BR>><<BR>><<BR>><<BR>><<BR>>
<<TableOfContents>>
<<BR>><<BR>>
###########################################################################
###########################################################################
<<BR>>


= Switching outputs 1 + 2 =

##/////////////////////////////////////////////////////////////////////////
{{{#!html
<div style="float: right; margin-left: 15px; margin-right: 15px; height: 110px; border: 1px solid #000; background-color: #E6E6E6;">
}}}
[[ http://gallery3.mikrokopter.de/var/albums/intern/MK-Baugruppen/FlightCtrl/FlightCtrl-V3.0/FC_V3_0_OUT1-2.jpg | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Baugruppen/FlightCtrl/FlightCtrl-V3.0/FC_V3_0_OUT1-2.jpg }} |target="_blank"]]

Connections !FlightCtrl V3.0 <<BR>>
~-(Connections [[  http://gallery3.mikrokopter.de/var/albums/intern/MK-Baugruppen/FlightCtrl/FlightCtrl_2_5/FC_V2_5_OUT1-2.jpg?m=1506602370 | FlightCtrl V2.5 |target="_blank"]])-~
{{{#!html
</div>
}}}
##/////////////////////////////////////////////////////////////////////////

 The following settings concern the switching outputs 1 + 2 of the !FlightCtrl.<<BR>>
 

  * Out 1 => Switching outputs 1
  * Out 2 => Switching outputs 2
  

<<BR>><<BR>><<BR>><<BR>><<BR>>

{{{{#!wiki important 
 
 +5V ~-(max 100mA)-~ are permanently present at the switching output. '''GND is switched in each case'''.<<BR>>
 If you want to switch consumers with a higher current consumption ~-(e.g. LEDs)-~, <<BR>>
 an external circuit must be used for the supply ~-(e.g. per [[en/ExtensionPCB|ExtensionPCB|target="_blank"]])-~.
<<BR>>
 If you want to trigger automatically via switching output 1 during a waypoint flight, <<BR>>
 the ''WP automatic'' must be activated. Information about this can be found here: [[en/Features/WaypointAutomatic|Link|target="_blank"]]

}}}} 



<<BR>><<BR>><<BR>>
##############################################################################


= Out 1 =

 Switching output 1 (Out1) can be set here.<<BR>>
 This output is usually used to trigger a photo camera. 
   

----
== Out1 Bitmask ==

##/////////////////////////////////////////////////////////////////////////
{{{#!html
<div style="float: right; margin-left: 15px; margin-right: 15px; height: 190px; border: 1px solid #000; background-color: #E6E6E6;">
}}}
[[ http://gallery3.mikrokopter.de/var/albums/intern/MK-Tool/Setting/Output/EN_Output-Out1.jpg | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Tool/Setting/Output/EN_Output-Out1.jpg }} |target="_blank"]]
{{{#!html
</div>
}}}
##/////////////////////////////////////////////////////////////////////////

 The boxes at ''Out1 Bitmask'' can be activated / deactivated with the left mouse button. <<BR>>

  * '''Idle''' => Basic state of the switching output after switching on the copter<<BR>>
   * Box {{{#!html 
  <span style="color:#FFF; background:#006400"> OFF </span> }}} = Switching output OFF
   *  Box {{{#!html 
  <span style="color:#FFF; background:#00FF00"> ON </span> 
  <span style="color:#00FF00; background:#00FF00"> . </span> }}} = Switching output ON
  <<BR>>

  * '''Sequence''' => Switching sequence at the switching output
   * Box {{{#!html 
  <span style="color:#FFF; background:#8B0000"> OFF </span> }}} = Switch off the switching output
   *  Box {{{#!html 
  <span style="color:#FFF; background:#FF0000"> ON </span> 
  <span style="color:#FF0000; background:#FF0000"> . </span> }}} = Switch on the switching output



<<BR>><<BR>>

== Out1 Timing ==

 For ''Out1 Timing'' either a ''POTI'' or a fixed value (0-247) can be entered. 
 <<BR>>
  * '''POTI'''
   If a free channel is assigned to a button on the remote control, the associated '' POTI '' can be entered here. <<BR>>
   If you press the button on the remote control, the switching output is switched ON / OFF.<<BR>>
   The set sequence does not matter via the boxes! All red boxes can also be set on or off. 
   <<BR>>

   ~-
   '''Example'''<<BR>>
   Under '''''Out1 Timing''''' we have set a '''POTI''' <<BR>>
   The red boxes were set this way: {{{#!html 
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> ON </span> }}} 


   Output 1 is now switched using a button: <<BR>>
    * Button pressed (Channel fully switched) => {{{#!html 
   <span style="color:#FFF; background:#FF0000"> As long as the button is pressed: Out1=ON </span> }}} 
    * Button not in use (Channel out) => {{{#!html 
   <span style="color:#FFF; background:#8B0000"> Out1=OFF </span> }}} 

   -~

   <<BR>>

  * '''Fix value'''
   A switching time (in 10ms per box) can be set with a fixed value (0-247).<<BR>>
   <<BR>>

   ~-
   '''Example 1'''<<BR>>
   A '''100''' was entered as value under '''''Out1 Timing''''' (100x10ms = 1 Second) <<BR>>
   The red boxes were set this way: {{{#!html 
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> ON </span> }}} 


   Output 1 is now switched continuously: <<BR>>
   {{{#!html
   <span style="color:#FFF; background:#FF0000"> 1s ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 1s OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> 1s ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 1s OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> 1s ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 1s OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> 1s ON </span> -> 
   <span style="color:#FFF; background:#FF0000"> 1s ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 1s OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> 1s ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 1s OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> 1s ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 1s OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> 1s ON </span> }}} ... and so on

   <<BR>>  

   '''Example 2'''<<BR>>
   AA '''100''' was entered as value under '''''Out1 Timing''''' (100x10ms = 1 Sekunde) <<BR>>
   The red boxes were set this way: {{{#!html 
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span> 
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span> }}}


   Output 1 is now switched continuously: <<BR>>
   {{{#!html
   <span style="color:#FFF; background:#FF0000"> 2s ON </span>
   <span style="color:#FF0000; background:#FF0000"> 2s ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 5s OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 5s OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 5s OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 5s OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 5s OFF </span> -> 
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> 2s ON </span>
   <span style="color:#FF0000; background:#FF0000"> 2s ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 5s OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 5s OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 5s OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 5s OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 5s OFF </span> }}} ... and so on
   -~


<<BR>><<BR>><<BR>>
##############################################################################

----
== Only active after motor start ==

##/////////////////////////////////////////////////////////////////////////
{{{#!html
<div style="float: right; margin-left: 15px; margin-right: 15px; height: 190px; border: 1px solid #000; background-color: #E6E6E6;">
}}}
[[ http://gallery3.mikrokopter.de/var/albums/intern/MK-Tool/Setting/Output/EN_Output-Active.jpg | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Tool/Setting/Output/EN_Output-Active.jpg }} |target="_blank"]]
{{{#!html
</div>
}}}
##/////////////////////////////////////////////////////////////////////////

 If a check is made under ''Only active after motor start'', output 1 is only activated after the motors have started .<<BR>>
 The output is deactivated again after the motors have been switched off.


<<BR>><<BR>>

== combine with WP-Event ==

 If a check is made under ''combine with WP-Event'', output 1 is linked to the waypoint flight. A specialty applies here: 
<<BR>>
 ''Out1 Timing'' -> POTI
  * If you set under ''Out1 Timing'' a POTI, you can switch with e.g. a 3way-button on your transmitter the function:
   * switch off => no function ("Waypoint Automatic" OFF) ~-(during a waypoint flight the output 1 will not trigger a connected camera)-~
   * switch center => "Waypoint Automatic" ON ~-(during a waypoint flight the output 1 will trigger the camera - depending on the settings in your waypoint flight)-~
   * switch ON => manual triggering
<<BR>>
 ''Out1 Timing'' -> value (0-247)
  * A numerical input switches the switching output permanently
   * 0 => no function ("Waypoint Automatic" OFF) ~-(during a waypoint flight the output 1 will not trigger a connected camera)-~
   * 127 => "Waypoint Automatic" ON ~-(during a waypoint flight the output 1 will trigger the camera - depending on the settings in your waypoint flight)-~

 '''INFO''' <<BR>>
 If a POTI has been entered and a push button has been inserted on the remote control, the '''WP automatic''' can also be used.<<BR>>
 Information about the setting can be found here: '''[[en/Features/WaypointAutomatic|WaypointAutomatic|target="_blank"]]'''

<<BR>><<BR>><<BR>>
##############################################################################

----
== AutoTrigger every ==

##/////////////////////////////////////////////////////////////////////////
{{{#!html
<div style="float: right; margin-left: 15px; margin-right: 15px; height: 190px; border: 1px solid #000; background-color: #E6E6E6;">
}}}
[[ http://gallery3.mikrokopter.de/var/albums/intern/MK-Tool/Setting/Output/EN_Output-Xmeter.jpg | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Tool/Setting/Output/EN_Output-Xmeter.jpg }} |target="_blank"]]
{{{#!html
</div>
}}}
##/////////////////////////////////////////////////////////////////////////

 With this setting, the switching output can be triggered automatically<<BR>>
 every X-meter permanently during the flight.
 <<BR>><<BR>>



 ||<class="MK_TableNoBorder" width= 280px >~-__Auto Trigger every ...X... '''[meter] in Distance__'''<<BR>>Every "X" meter (in distance) the output Out1<<BR>> will be trigger automatically-~||<class="MK_TableNoBorder" width= 280px >~-__Auto Trigger every ...X... '''[meter] in Altitude__'''<<BR>>Every "X" meter (Altitude) the output Out1<<BR>>will be trigger automatically-~||
 ||<class="MK_TableNoBorder">[[ http://gallery3.mikrokopter.de/var/albums/intern/MK-Tool/Sonstiges/AutoTrigger-Distance.jpg?m=1507559514 | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Tool/Sonstiges/AutoTrigger-Distance.jpg?m=1507559514 }} |target="_blank"]]||<class="MK_TableNoBorder">[[ http://gallery3.mikrokopter.de/var/albums/intern/MK-Tool/Sonstiges/AutoTrigger-Altitude.jpg?m=1507559514 | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Tool/Sonstiges/AutoTrigger-Altitude.jpg?m=1507559514 }}|target="_blank" ]]||

<<BR>><<BR>>

 '''Info''' <<BR>>
 With automatic triggering every "X" meter, a fixed value of 10ms is used for triggering per box in the sequence. The sequence of the bit mask is completely processed once per triggering.

  ~-
   '''Example: 1 trigger every "X" Meter''' <<BR>>
   The red boxes were set this way: {{{#!html 
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span> }}} 


   Output 1 is now switched every "X" meter: <<BR>>
   {{{#!html
   <span style="color:#FFF; background:#FF0000"> 10ms ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 60ms OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 60ms OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 60ms OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 60ms OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 60ms OFF </span> }}}

   <<BR>>
   If the trigger is too fast for the camera used, it can also be enlarged: <<BR>>
   '''Example: 1 trigger (longer)''' <<BR>>
   The red boxes were set this way: {{{#!html 
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span> }}} 


   Output 1 is now switched every "X" meter: <<BR>>
   {{{#!html
   <span style="color:#FFF; background:#FF0000"> 20ms ON </span>
   <span style="color:#FF0000; background:#FF0000"> 20ms ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 50ms OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 50ms OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 50ms OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 50ms OFF </span> }}}
   
   <<BR>><<BR>>

   '''Example: 2 trigger every "X" Meter''' <<BR>>
   The red boxes were set this way: {{{#!html 
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span> }}} 


   Output 1 is now switched every "X" meter: <<BR>>
   {{{#!html
   <span style="color:#FFF; background:#FF0000"> 10ms ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 10ms OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> 10ms ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 40ms OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 40ms OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 40ms OFF </span> }}}


-~










<<BR>><<BR>><<BR>>
##############################################################################


= Out 2 =

 Switching output 2 (Out2) can be set here.<<BR>>
 This output is usually used to trigger/switch e.g. LEDs. 
   

----
== Out2 Bitmask ==

##/////////////////////////////////////////////////////////////////////////
{{{#!html
<div style="float: right; margin-left: 15px; margin-right: 15px; height: 190px; border: 1px solid #000; background-color: #E6E6E6;">
}}}
[[ http://gallery3.mikrokopter.de/var/albums/intern/MK-Tool/Setting/Output/EN_Output-Out1.jpg | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Tool/Setting/Output/EN_Output-Out1.jpg }} |target="_blank"]]
{{{#!html
</div>
}}}
##/////////////////////////////////////////////////////////////////////////

 The boxes at ''Out2 Bitmask'' can be activated / deactivated with the left mouse button. <<BR>>

  * '''Idle''' => Basic state of the switching output after switching on the copter<<BR>>
   * Box {{{#!html 
  <span style="color:#FFF; background:#006400"> OFF </span> }}} = Switching output OFF
   *  Box {{{#!html 
  <span style="color:#FFF; background:#00FF00"> ON </span> 
  <span style="color:#00FF00; background:#00FF00"> . </span> }}} = Switching output ON
  <<BR>>

  * '''Sequence''' => Switching sequence at the switching output
   * Box {{{#!html 
  <span style="color:#FFF; background:#8B0000"> OFF </span> }}} = Switch off the switching output
   *  Box {{{#!html 
  <span style="color:#FFF; background:#FF0000"> ON </span> 
  <span style="color:#FF0000; background:#FF0000"> . </span> }}} = Switch on the switching output



<<BR>><<BR>>

== Out2 Timing ==

 For ''Out2 Timing'' either a ''POTI'' or a fixed value (0-247) can be entered. 
 <<BR>>
  * '''POTI'''
   If a free channel is assigned to a button on the remote control, the associated '' POTI '' can be entered here. <<BR>>
   If you press the button on the remote control, the switching output is switched ON / OFF.<<BR>>
   The set sequence does not matter via the boxes! All red boxes can also be set on or off. 
   <<BR>>

   ~-
   '''Example'''<<BR>>
   Under '''''Out2 Timing''''' we have set a '''POTI''' <<BR>>
   The red boxes were set this way: {{{#!html 
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> ON </span> }}} 


   Output 2 is now switched using a button: <<BR>>
    * Button pressed (Channel fully switched) => {{{#!html 
   <span style="color:#FFF; background:#FF0000"> As long as the button is pressed: Out1=ON </span> }}} 
    * Button not in use (Channel out) => {{{#!html 
   <span style="color:#FFF; background:#8B0000"> Out1=OFF </span> }}} 

   -~

   <<BR>>

  * '''Fix value'''
   A switching time (in 10ms per box) can be set with a fixed value (0-247).<<BR>>
   <<BR>>

   ~-
   '''Example 1'''<<BR>>
   A '''100''' was entered as value under '''''Out2 Timing''''' (100x10ms = 1 Second) <<BR>>
   The red boxes were set this way: {{{#!html 
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> ON </span> }}} 


   Output 1 is now switched continuously: <<BR>>
   {{{#!html
   <span style="color:#FFF; background:#FF0000"> 1s ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 1s OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> 1s ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 1s OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> 1s ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 1s OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> 1s ON </span> -> 
   <span style="color:#FFF; background:#FF0000"> 1s ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 1s OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> 1s ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 1s OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> 1s ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 1s OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> 1s ON </span> }}} ... and so on

   <<BR>>  

   '''Example 2'''<<BR>>
   AA '''100''' was entered as value under '''''Out2 Timing''''' (100x10ms = 1 Sekunde) <<BR>>
   The red boxes were set this way: {{{#!html 
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span> 
   <span style="color:#FFF; background:#8B0000"> OFF </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> OFF </span> }}}


   Output 1 is now switched continuously: <<BR>>
   {{{#!html
   <span style="color:#FFF; background:#FF0000"> 2s ON </span>
   <span style="color:#FF0000; background:#FF0000"> 2s ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 5s OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 5s OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 5s OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 5s OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 5s OFF </span> -> 
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#FF0000"> 2s ON </span>
   <span style="color:#FF0000; background:#FF0000"> 2s ON </span>
   <span style="color:#FFF; background:#FFF">.</span>
   <span style="color:#FFF; background:#8B0000"> 5s OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 5s OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 5s OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 5s OFF </span>
   <span style="color:#8B0000; background:#8B0000"> 5s OFF </span> }}} ... and so on
   -~


<<BR>><<BR>><<BR>>
##############################################################################

----
== Only active after motor start ==

##/////////////////////////////////////////////////////////////////////////
{{{#!html
<div style="float: right; margin-left: 15px; margin-right: 15px; height: 190px; border: 1px solid #000; background-color: #E6E6E6;">
}}}
[[ http://gallery3.mikrokopter.de/var/albums/intern/MK-Tool/Setting/Output/EN_Output-Active.jpg | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Tool/Setting/Output/EN_Output-Active.jpg }} |target="_blank"]]
{{{#!html
</div>
}}}
##/////////////////////////////////////////////////////////////////////////

 If a check is made under ''Only active after motor start'', output 2 is only activated after the motors have started .<<BR>>
 The output is deactivated again after the motors have been switched off.










<<BR>><<BR>><<BR>>
##############################################################################


= Undervoltage =

##/////////////////////////////////////////////////////////////////////////
{{{#!html
<div style="float: right; margin-left: 15px; margin-right: 15px; height: 190px; border: 1px solid #000; background-color: #E6E6E6;">
}}}
[[ http://gallery3.mikrokopter.de/var/albums/intern/MK-Tool/Setting/Output/EN_Output-LowVolt.jpg | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Tool/Setting/Output/EN_Output-LowVolt.jpg }} |target="_blank"]]
{{{#!html
</div>
}}}
##/////////////////////////////////////////////////////////////////////////

 In the settings under ''[[en/MK-Parameter/Misc|Misc|target="_blank"]]'' we have the ''undervoltage warning''.<<BR>>
 If the undervoltage warning is active, the here "active" set output is automatically activated and a fast flashing pattern then takes place via this output. <<BR>>

 '''INFO''' <<BR>>
 Only the output with connected leds should be "active".<<BR>>
 If you activate here also the switching output where a camera is connected, the camera will trigger in this interval during an undervoltage warning ;-)
 






<<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>>