>
<
><
>
###########################################################################
###########################################################################
<
>
= Info =
There are a total of four different ways to switch the !MikroKopter on / off. <
>
Three options include a safety function that prevents the motors from being switched off accidentally in flight. <
>
The settings can be changed in the !KopterTool under "Settings" -> "Channels"
= Motor safety switch =
##/////////////////////////////////////////////////////////////////////////
{{{#!html
}}}
[[ http://gallery3.mikrokopter.de/var/resizes/intern/MK-Tool/Setting/Channels/EN_Channels-MotorSW.jpg | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Tool/Setting/Channels/EN_Channels-MotorSW.jpg }} |target="_blank"]]
{{{#!html
}}}
##/////////////////////////////////////////////////////////////////////////
'''The !MikroKopter motors can be started / stopped in 4 different ways.''' <
>
* Switching on / off via a stick '''without safety function''' <
>
~-(In this way, motors can easily be switched off accidentally during flight!)-~
* Switch on / off via certain positions of '''both sticks'''
* Switching on / off via stick with additional '''push button'''
* Switching on / off via stick with additional '''button'''
The last 3 options can be used to prevent the motors from being accidentally switched off in flight.
<
>
The setting under ''Motor safety switch'' determines how the motors are switched on / off: <
>
* '''OFF''' <
>
* Start engines => throttle down + yaw right
* Stop engines => throttle down + yaw left
* '''Inaktiv''' <
>
* Start engines => throttle down + yaw right '''plus''' Nick down + Roll left or right
* Stop engines => throttle down + yaw left '''plus''' Nick down + Roll left or right
* '''Ch xx''' <
>
- The channel entered here is assigned to a push button on the remote control <
>
- This channel is inverted on the remote control so that when the button is not pressed, the channel is switched (254).<
>
* Start engines => Press the push button and hold it '''plus''' throttle down + yaw right
* Stop engines => Press the push button and hold it '''plus''' throttle down + yaw left
* '''Ch xx + hook at engine start / stop''' <
>
- The channel entered here is assigned to a 2-way switch on the remote control <
>
* Start engines => throttle down '''then''' move 2-way switch to position ON
* Stop engines => throttle down '''then''' move 2-way switch to position OFF<
>
~-(The 2-way switch has no function if the gas stick is not at the bottom!)-~